 flamingcow
|
4df30912b1
|
Ghost SNR check removed as asked: no bounds, no panic, no latch re-read — a raw 0x0000 in 1.133-136 decodes as no-margin-this-poll (the untrained resting value, which appears before 1.1 reports a drop, so no read ordering could prove a ghost); panel value columns bounded by scalePanelCount (4 chars forever) with RESET narrowed to 5 chars so counts can never reach the timeline; rows and heat cells stretch proportionally to fill the band between header and footer instead of leaving the bottom half dead
|
2026-08-17 21:48:29 -07:00 |
|
|
flamingcow
|
66ff49f9d2
|
Noise ripped out after the bench verdict (tightly-wrapped unshielded cables move victim SNR only 0.2-0.3 dB, recorded in measurement.md dead ends): noise.go deleted with the noiser, phase clock and panel lane; configureNoise/checkPrivFlag gone so the X710 pair is untouched; console noise column, NOISE links rows and lane colors removed; driverPair rehomed to system.go, carrierUp to phy.go; history anchors to run start (frame-rate sampling and draw-clock roll kept — they fix display latency for every lane); goals/hardware/state/nics docs updated; verified on hardware (20.00G, zero errors, ECD 41m, SNR +7.6)
|
2026-08-17 21:37:18 -07:00 |
|
|
flamingcow
|
be2bf56fa7
|
Unplugged-cable behavior fixed end to end: heat grid rolls on the slot boundary (view computes the newest slot from the draw clock; history sampled every frame so slots color within a frame; noise phase displayed as commanded straight from the shared clock — radiating and the per-slot vote deleted), SNR ghost panic disambiguated via the PMA 1.1 latch (link dropped mid-read discards the batch, ghost on a proven-up link still dies), measure skips the 25s relink wait when the ECD verdict says faulted and the header says MEASURING instead of GOOD while a diag runs, RollBall mailbox deadline resized to 10s from bench measurement (<25ms linked, ~220ms no-link, >3s during a live plug's training; docs/modules/wiitek updated)
|
2026-08-17 21:29:02 -07:00 |
|
|
flamingcow
|
916c0150ef
|
Bugs-evident cleanup: cable-measure failure is fatal with its reason (failed/fail pretend-path and dead relinked plumbing deleted), bcm.command refuses partial SETs (0 or 5 params, stale-DATA trap made structural), BOOT gains a patched-ixgbe check naming stock-driver boots, panel fault rows matched by label and console rows strict on column count, phy.go split into sff/bcm/rollball and main.go's direction machinery into direction.go (pure moves), input events decoded via encoding/binary, gofmt; verified on hardware (20.00G, zero errors, ECD 41m)
|
2026-08-17 18:56:55 -07:00 |
|
|
flamingcow
|
fb4b4596e9
|
Panel rebuilt as the heat matrix: verdict header (ring + newest fault named with its age, cable cell top right), one row per check with NOW / last-90s-at-5s-a-cell / since-reset columns, noise as a blue context lane; history.go keeps the 18-slot wall-time ring (per-class fault deltas, SNR minima, rate verdicts, measuring gray) plus since-reset aggregates and fault ages that clear on reset; noise cycle grid-locked to the shared slot clock so cells never straddle a phase and flicker, presence granted at boot until the first up-phase verdict; check/cross stroked as capsule marks (font has neither), line rate is a pure verdict everywhere, footer is a three-line stat stack beside hold-to-reset; old panel/chip/stat-grid machinery deleted; mockups/ gitignored
|
2026-08-17 12:22:55 -07:00 |
|
|
flamingcow
|
e3c3f945c5
|
Cable verdict folded into one console cell (length green, fault name red, xover amber, fail; diag rule lines and counters-reset line gone), reset fires at the press not diag completion, and the measure's blip is suppressed at every counter source instead of counted-hidden-reverted: worker error adds, loss-window write-offs (quiet slides state without charging; leaving the quiet era presumes in-window holes delivered so the gap's tail is never charged late), NIC poller tracks raw without accumulating, socket drops discarded, modules un-primed by the measure itself; display hold deleted so pre-existing errors no longer blink out during a measure
|
2026-08-17 11:25:31 -07:00 |
|
|
flamingcow
|
6a1a860548
|
Panel cleanup: chip padding up a step and a tighter chip line gap, corrected/SNR numbers neutral until amber or red, dB margin casing, compound elapsed units (1m39s) ending the minutes/metres m collision, noise chip shows presence only
|
2026-08-14 23:47:45 -07:00 |
|
|
flamingcow
|
a9f10d3055
|
Windowed module protocol: every op admitted inside a 3.4s window after the firmware's observed temp poll (cadence 3.5-4.2s measured, stuck-at-last-fetch stale mechanism proven and avoided), acquire/window with panic on dead heartbeat; noise column shows green on/off cycle phase, cable-missing state unchanged
|
2026-08-13 14:04:16 -07:00 |
|
|
flamingcow
|
bba1fa5e02
|
Jumbo in the size mix (MTU 9000 + module jumbo pinned), check-first module config trusting GET reads, cable diag async at startup through the reset path, MODULES table dissolved into SETTINGS/LINKS, per-driver NIC counter sets, comment cleanup
|
2026-08-13 08:04:26 -07:00 |
|
|
flamingcow
|
979dc7a772
|
BCM module diagnostics replace timestamp probes: bringup forces EEE off and runs ECD (re-run on every reset, re-baselining past its blip), 1 Hz SNR margin + corrected counters on panel and console; X520 bench divergences bypassed and tracked in open-questions
|
2026-08-13 07:10:39 -07:00 |
|
|
flamingcow
|
e7c73ca0a9
|
Reveal the build's commit hash in place of the reset label while a finger holds the top-right corner, and dev where go run left no stamp
|
2026-08-05 16:13:20 -07:00 |
|
|
flamingcow
|
2fcab83756
|
Drive a noise cable on the i40e pair, cycling its link down and up since the module PHYs ignore everything softer, and flag its absence beside the error columns
|
2026-08-05 10:49:23 -07:00 |
|
|
flamingcow
|
2035d42734
|
Fold the leftover formatters into the SI ones and stop reallocating the draw scratch
|
2026-08-04 13:37:19 -07:00 |
|
|
flamingcow
|
21b20d0071
|
Scale integer counts on the panel like every other figure
|
2026-08-04 11:27:35 -07:00 |
|
|
flamingcow
|
5eea6856fb
|
Cut the comments back to the genuinely subtle ones
|
2026-08-01 16:14:12 -07:00 |
|
|
flamingcow
|
726c4c2445
|
Rework the panel onto SI figures, labelled chips and one spacing scale
|
2026-08-01 16:07:44 -07:00 |
|
|
flamingcow
|
de2ff13eb6
|
Collapse errors into lost, corrupt, link and internal
|
2026-07-31 17:10:25 -07:00 |
|
|
flamingcow
|
3c8637f931
|
Show recent errors as labelled chips and rebuild the reset button to match
|
2026-07-31 17:05:31 -07:00 |
|
|
flamingcow
|
1c5bda37bf
|
Drive the panel through drm and page flip between four scanout buffers
|
2026-07-31 16:46:11 -07:00 |
|
|
flamingcow
|
832a2b42d6
|
Mount the filesystems we need so this can run as PID 1
|
2026-07-26 10:54:19 -07:00 |
|
|
flamingcow
|
102d53fb9b
|
Turn the display portrait and split it into live and since-reset panels
|
2026-07-26 10:27:41 -07:00 |
|
|
flamingcow
|
e77574712d
|
Cycle every payload pattern per packet and always run both directions
|
2026-07-25 23:03:31 -07:00 |
|
|
flamingcow
|
1b322bb32b
|
Measure cable length from hardware transmit and receive timestamps
|
2026-07-25 22:38:52 -07:00 |
|
|
flamingcow
|
09411aebdf
|
Reset everything from a held on-screen button or space
|
2026-07-25 21:41:21 -07:00 |
|
|
flamingcow
|
b2441ba64a
|
Redraw at 60Hz with adaptive rate smoothing, console output at 1Hz
|
2026-07-25 21:30:37 -07:00 |
|
|
flamingcow
|
892e855207
|
Group the display into instant and cumulative sections on a shared grid
|
2026-07-25 19:48:15 -07:00 |
|
|
flamingcow
|
419bdc4bb7
|
Render the live status to the framebuffer in Atkinson Hyperlegible Mono
|
2026-07-25 19:41:53 -07:00 |
|