Unplugged-cable behavior fixed end to end: heat grid rolls on the slot boundary (view computes the newest slot from the draw clock; history sampled every frame so slots color within a frame; noise phase displayed as commanded straight from the shared clock — radiating and the per-slot vote deleted), SNR ghost panic disambiguated via the PMA 1.1 latch (link dropped mid-read discards the batch, ghost on a proven-up link still dies), measure skips the 25s relink wait when the ECD verdict says faulted and the header says MEASURING instead of GOOD while a diag runs, RollBall mailbox deadline resized to 10s from bench measurement (<25ms linked, ~220ms no-link, >3s during a live plug's training; docs/modules/wiitek updated)

docs/modules/wiitek/README.md

@@ -40,6 +40,8 @@ cabletest drives this module through its own Go RollBall client (`phy.go`): modu
 
 Not available in safe space: pre-FEC counter, cable length — those live in the µC vendor space that killed the modules.
 
+**Mailbox latency is regime-dependent** — <25 ms per read linked (X520 host), ~220 ms steady with no link (bench-measured, `~/work/phydiag-work/rb_mbox_latency.py`), and beyond 3 s while 10GBASE-T training runs (observed live when a cable plug landed mid-read at bringup). cabletest's mailbox deadline (`rbCmdTimeout`) is sized past a full ~6 s training so a plug event reads busy, not dead.
+
 **Mailbox trap: an orphaned command's completion answers as yours.** If a session dies mid-mailbox-op (killed process), the µC finishes the orphaned command on its own time, leaving CMD=DONE and that command's value in the block. A next session that issues a command and samples status immediately reads the orphan's DONE and value as its own — seen live: a PHY ID 1.2 read answered 0x0006, the orphaned EEE-advert (7.60) value of the killed session, while the very next read was correct. The client therefore never samples status before a full poll gap, reads the value from the same 6-byte block read as the status, and accepts a completion only when the block echoes the issued devad/reg (`phy.go` mbox). The split-transaction python clients always had the pre-sample gap, which is why the field campaign never hit this.
 
 ## VCT/cable length: no confirmed-safe path

history.go

@@ -5,10 +5,11 @@ import (
 	"time"
 )
 
-// The panel's recent-history ring: 18 slots of 5 seconds, sampled once a
-// second from the same figures the console row prints. Slots are wall-time
-// and survive a reset — recently is recently, whatever the counters were
-// re-based to — while the since-reset aggregates and fault ages clear.
+// The panel's recent-history ring: 18 slots of 5 seconds, sampled every drawn
+// frame from the same figures the panel paints, so a slot has data within one
+// frame of being born. Slots are wall-time and survive a reset — recently is
+// recently, whatever the counters were re-based to — while the since-reset
+// aggregates and fault ages clear.
 const (
 	histSlots    = 18
 	histSlotSpan = 5 * time.Second
@@ -39,15 +40,12 @@ type histSlot struct {
 	rateLow   bool
 	haveSNR   bool
 	snrMin    float64
-	noiseOn   int
-	noiseN    int
 }
 
 type history struct {
 	mu    sync.Mutex
 	start time.Time
 	slots [histSlots]histSlot
-	seq   int64
 
 	prevValid     bool
 	prevSince     errs
@@ -80,13 +78,12 @@ func delta(now, prev uint64) uint64 {
 	return now - prev
 }
 
-func (h *history) sample(now time.Time, v view, phy phyDisplay, nv noiseView,
+func (h *history) sample(now time.Time, v view, phy phyDisplay,
 	measuring bool, target float64) {
 	h.mu.Lock()
 	defer h.mu.Unlock()
 
-	h.seq = int64(now.Sub(h.start) / histSlotSpan)
-	s := h.slot(h.seq)
+	s := h.slot(int64(now.Sub(h.start) / histSlotSpan))
 
 	if h.prevValid {
 		for i, c := range faultClasses {
@@ -118,10 +115,6 @@ func (h *history) sample(now time.Time, v view, phy phyDisplay, nv noiseView,
 			}
 		}
 	}
-	s.noiseN++
-	if nv.on {
-		s.noiseOn++
-	}
 }
 
 // The wall-time slots stay: recently is recently. Everything judged against
@@ -146,12 +139,16 @@ type histView struct {
 	sinceSNRMin  float64
 }
 
-func (h *history) view() histView {
+// The window's newest column is the slot containing now, taken from the draw
+// clock rather than the last sample: the grid then rolls on the slot boundary
+// itself — the same instant the noise cycle flips.
+func (h *history) view(now time.Time) histView {
 	h.mu.Lock()
 	defer h.mu.Unlock()
+	newest := int64(now.Sub(h.start) / histSlotSpan)
 	var out histView
 	for k := 0; k < histSlots; k++ {
-		seq := h.seq - int64(histSlots-1-k)
+		seq := newest - int64(histSlots-1-k)
 		if seq < 0 {
 			continue
 		}

main.go

@@ -403,8 +403,9 @@ func run(aName, bName string) (err error) {
 			}
 			v := totalView(views)
 			phy, measuring := phyView(diag, modules)
+			hist.sample(now, v, phy, measuring, target)
 			if err := disp.render(v, now.Sub(start), phy, measuring,
-				noise.view(), hist.view(), target); err != nil {
+				noise.view(), hist.view(now), target); err != nil {
 				return err
 			}
 		case now := <-tick.C:
@@ -413,8 +414,7 @@ func run(aName, bName string) (err error) {
 				rows[i] = d.displayView()
 			}
 			v := totalView(rows)
-			phy, measuring := phyView(diag, modules)
-			hist.sample(now, v, phy, noise.view(), measuring, target)
+			phy, _ := phyView(diag, modules)
 			for _, m := range modules {
 				for _, n := range m.takeNotes() {
 					fmt.Println(stats.rule(n))

noise.go

@@ -65,6 +65,16 @@ type noisePort struct {
 	frame []byte
 }
 
+// The cycle is a pure function of the shared slot clock: even slots up — ports
+// admin-up and the wire loud, training or frames — odd slots down. Everything
+// that shows the phase computes it from the clock through here rather than
+// sampling the actuator, whose ioctls lag the boundary.
+func slotUp(seq int64) bool { return seq%2 == 0 }
+
+func noiseUp(now time.Time) bool {
+	return slotUp(int64(now.Sub(rateEpochStart) / histSlotSpan))
+}
+
 type noiser struct {
 	eps   [2]endpoint
 	ports [2]noisePort
@@ -73,8 +83,6 @@ type noiser struct {
 	// phase. Latched across the down phase, where the missing carrier is our
 	// own doing and says nothing about the cable.
 	connected atomic.Bool
-	// The cycle's up phase: ports admin-up and the wire loud, training or frames.
-	radiating atomic.Bool
 }
 
 func newNoiser() (*noiser, error) {
@@ -124,9 +132,9 @@ type noiseView struct {
 
 // missing is zero while the cable was there at the last verdict, one while it
 // was not: the shape the error cells already colour by, so absence paints as
-// the fault it is. on is the cycle's phase, presence granted.
+// the fault it is. on is the commanded phase, straight from the clock.
 func (n *noiser) view() noiseView {
-	v := noiseView{on: n.radiating.Load()}
+	v := noiseView{on: noiseUp(time.Now())}
 	if !n.connected.Load() {
 		v.missing = 1
 	}
@@ -188,7 +196,7 @@ func (n *noiser) run(done *atomic.Bool) {
 	applied, wasUp, linked := false, false, false
 	for !done.Load() {
 		<-tick.C
-		up := (time.Since(rateEpochStart)/histSlotSpan)%2 == 0
+		up := noiseUp(time.Now())
 		if !applied || up != wasUp {
 			// A whole up phase with no link is many times the ~1s the wire
 			// needs to train, so at its end the silence is the cable's answer.
@@ -196,7 +204,6 @@ func (n *noiser) run(done *atomic.Bool) {
 				n.connected.Store(linked)
 			}
 			n.setLinks(fd, up)
-			n.radiating.Store(up)
 			applied, wasUp, linked = true, up, false
 		}
 		if !up || !n.bothUp() {

phy.go

@@ -38,7 +38,7 @@ type phyDev interface {
 }
 
 type snrSource interface {
-	snrMargins() ([4]float64, error)
+	snrMargins() ([4]float64, bool, error)
 }
 
 // PMA 1.1 latches low, so the first read reports any drop since it was last
@@ -137,10 +137,9 @@ func (m *phyModule) poll() error {
 	var margins [4]float64
 	haveSNR := false
 	if src, ok := m.dev.(snrSource); ok && link {
-		if margins, err = src.snrMargins(); err != nil {
+		if margins, haveSNR, err = src.snrMargins(); err != nil {
 			return err
 		}
-		haveSNR = true
 	}
 	blocks, ber, pcsRaw, err := devPCSLatch(m.dev)
 	if err != nil {
@@ -405,7 +404,18 @@ func measureCable(mods []*phyModule, done *atomic.Bool) (cableInfo, error) {
 	if err = devRestartAN(end); err != nil {
 		return c, err
 	}
-	waitCarrier([2]string{mods[0].dev.name(), mods[1].dev.name()}, done)
+	// A pair the diag just called faulted is not going to relink; waiting the
+	// full carrier timeout would hold the verdict hostage for 25 s on an
+	// unplugged cable.
+	healthy := true
+	for _, v := range c.ecd.verdicts {
+		if v != pairOK {
+			healthy = false
+		}
+	}
+	if healthy {
+		waitCarrier([2]string{mods[0].dev.name(), mods[1].dev.name()}, done)
+	}
 	for i, m := range mods {
 		b, ok := m.dev.(*bcm)
 		if !ok {

rollball.go

@@ -25,8 +25,10 @@ const (
 
 	rbReadDelayUs = 500
 	rbCmdPoll     = 20 * time.Millisecond
-	// Matches the BCM allowance for a handler frozen by 10GBASE-T training.
-	rbCmdTimeout = 3 * time.Second
+	// Bench-measured: <25 ms linked, ~220 ms steady with no link, and >3 s
+	// while a live plug event's training ran — sized past a full ~6 s
+	// training, so a cable plugged mid-read reads busy, not dead.
+	rbCmdTimeout = 10 * time.Second
 
 	rbPHYIDHi uint16 = 0x002B
 	rbPHYIDLo uint16 = 0x0BF4
@@ -168,7 +170,12 @@ func (r *rollball) identify() (ident string, err error) {
 	return
 }
 
-func (r *rollball) snrMargins() (out [4]float64, err error) {
+// An untrained PHY honestly serves 0x0000 here, so an out-of-band value is
+// only a ghost if the link stayed up across the reads. The caller drained the
+// PMA 1.1 latch when it checked the link, so one latched read now answers
+// that: a drop since means the unplug race — discard the batch, ok false, and
+// the next poll reads the link down.
+func (r *rollball) snrMargins() (out [4]float64, ok bool, err error) {
 	r.exec(func() {
 		for i := range out {
 			var v uint16
@@ -177,10 +184,19 @@ func (r *rollball) snrMargins() (out [4]float64, err error) {
 			}
 			m := (float64(v) - 0x8000) / 10
 			if m < rbGhostLow || m > rbGhostHigh {
-				panic(fmt.Sprintf("%s: ghost SNR margin %.1f dB (1.%d=%#04x)", r.ifname, m, 133+i, v))
+				var link uint16
+				if link, err = r.mdioRead(1, 1); err != nil {
+					return
+				}
+				if link&0x0004 == 0 {
+					return
+				}
+				panic(fmt.Sprintf("%s: ghost SNR margin %.1f dB (1.%d=%#04x) with the link up",
+					r.ifname, m, 133+i, v))
 			}
 			out[i] = m
 		}
+		ok = true
 	})
 	return
 }

ui.go

@@ -326,8 +326,10 @@ func (d *display) heatCell(rowY, k int, c rgb) {
 
 // The verdict names the newest thing wrong at any horizon: the cable's own
 // fault first, then the most recent traffic fault with its age, and only a
-// clean record reads GOOD.
-func (d *display) drawHeader(v view, phy phyDisplay, hv histView, now time.Time) {
+// clean record reads GOOD. While a measure runs the tester is asserting
+// nothing, and says so instead of GOOD.
+func (d *display) drawHeader(v view, phy phyDisplay, hv histView, measuring bool,
+	now time.Time) {
 	good := true
 	word, sub := "GOOD", []seg{{d.text, "no faults", uiInk2}}
 	if i, age, ok := hv.newestFault(now); ok {
@@ -349,13 +351,18 @@ func (d *display) drawHeader(v view, phy phyDisplay, hv histView, now time.Time)
 	if !good {
 		col = uiCrit
 	}
+	if measuring {
+		word, sub, col = "MEASURING", []seg{{d.text, "cable diag running", uiInk2}}, uiMuted
+	}
 	rx, ry := uiMargin, headerTop
 	d.fb.roundRect(rx, ry, ringD, ringD, ringD/2, col)
 	d.fb.roundRect(rx+ringEdge, ry+ringEdge, ringD-2*ringEdge, ringD-2*ringEdge,
 		ringD/2-ringEdge, uiBg)
-	if good {
+	switch {
+	case measuring:
+	case good:
 		d.check(rx+ringD/2, ry+ringD/2, 44, col)
-	} else {
+	default:
 		d.cross(rx+ringD/2, ry+ringD/2, 40, col)
 	}
 
@@ -476,11 +483,13 @@ func (d *display) drawRows(v view, phy phyDisplay, measuring bool, nv noiseView,
 			} else {
 				d.colText(d.text, nowR, y, state, uiInk2)
 			}
+			// The lane shows the commanded phase, a pure function of each
+			// slot's parity; only slots the run never lived through are unknown.
 			for k, s := range hv.slots {
 				c := uiCellNA
-				if s.sampled && s.noiseN > 0 {
+				if s.sampled {
 					c = uiNoise0
-					if 2*s.noiseOn >= s.noiseN {
+					if slotUp(s.seq) {
 						c = uiNoise
 					}
 				}
@@ -548,7 +557,7 @@ func (d *display) render(v view, elapsed time.Duration, phy phyDisplay,
 	fb := d.fb
 	fb.fill(uiBg)
 
-	d.drawHeader(v, phy, hv, time.Now())
+	d.drawHeader(v, phy, hv, measuring, time.Now())
 	d.hairline(d.headerH - 1)
 	d.drawColHeaders()
 	d.drawRows(v, phy, measuring, nv, hv, target)