cabletest/docs/panels/rvt70/riverdi-rvt70hshnwc00-b-datasheet.md

Riverdi RVT70HSHNWC00-B datasheet — transcription

Full visual transcription (tables intact) of the Riverdi public datasheet DS_RVT70HSHNWC00-B Rev.1.6 ("HB,IPS 7.0" HDMI LCD TFT DATASHEET", TFT Module Specification), all 18 pages. Source PDF alongside as riverdi-rvt70hshnwc00-b-datasheet.pdf.

This is the module specification: the carrier board (RTD2660H HDMI controller, power, backlight, USB-C touch) and the module-level mechanical, optical and inspection data. It is not the panel timing specification — section 11 defers the display's own detail to the TFT panel inside it, transcribed alongside as riverdi-rvt70hstnwc00-b-datasheet.md, so this document contains no pixel clock or blanking table.

Transcription notes:

• Each page's content begins with an HTML comment page marker <!-- p.N --> (N = the printed datasheet page number) for cross-reference and continuity.
• Every specification, pinout and criteria table is reproduced as a Markdown table.
• Graphical figures, the PCB photograph and the mechanical drawing are not pixel-reproduced; they are given a short prose description prefixed *Figure (described):*, with all dimension and label callouts transcribed.
• Pure transcription: no cabletest commentary is interleaved, and typographic errors in the original (e.g. the panel part number in section 11, "Clo6ck" in the HDMI pinout) are reproduced as printed rather than silently corrected.

---

(Cover page. Left edge carries the vertical banner text "TFT MODULE SPECIFICATION". Riverdi logo centred at the top.)

RVT70HSHNWC00-B

HB,IPS 7.0" HDMI LCD TFT DATASHEET

Rev.1.6

2022-12-14

ITEM	CONTENTS	UNIT
LCD Type	TFT/Transmissive/Normally Black/IPS	/
Size	7.0	Inch
Viewing Direction	Free	/
Outside Dimensions (W x H x D)	179.96 x 119.00 x 24.18	mm
Active Area (W x H)	154.21 x 85.92	mm
Pixel Pitch (W x H)	0.1506 x 0.1432	mm
Resolution	1024 (RGB) x 600	/
Brightness	850	cd/m²
Color Depth	16.7 M	/
Pixel Arrangement	RGB Vertical Stripe	/
Controller of the Main Board	RTD2660H	/
Video Interface	HDMI	/
With/Without Touch	With Projected Capacitive Touch Panel	/
CTP Driver	ILI2132A	/
Touch Panel Interface	USB-C	/
Power Supply	Power Jack (DC 7.0V - 30.0 V),USB-C	V
Bonding Technology	Optical Bonding	/
Weight	249	g

Note 1. RoHS3 compliant

Note 2. LCM weight tolerance: ± 5%.

---

1. REVISION RECORD

REV NO.	REV DATE	CONTENTS	REMARKS
1.0	2021-03-10	Initial Release
1.1	2021-04-16	HDMI board picture updated
1.2	2021-07-21	Correction of J5 connector description
1.3	2021-08-05	Updating new template Correction of external keyboard connector pinout
1.4	2022-01-13	Updating the dip switches on the drawing.
1.5	2022-02-02	Correct the description of DC1 from 7.0 V-14.0V to 7.0V- 30.0V
1.6	2022-12-14	Update 2 parameters of Backlight PWM &Power - J5 • Clarify PWM frequency range: 1kHz-10kHz • Clarify the power input voltage range for pin5, 6 (VDD) Monitor controller is upgraded from RTD2662 to RTD2660H

---

2. CONTENTS

Section	Page
1. REVISION RECORD	2
2. CONTENTS	3
3. MODULE CLASSIFICATION INFORMATION	4
4. ASSEMBLY GUIDE	5
4.1 uxTouch ASSEMBLY	5
5. MODULE DRAWING	6
6. ABSOLUTE MAXIMUM RATINGS	7
7. ELECTRICAL CHARACTERISTICS	7
8. BACKLIGHT DRIVING CONDITIONS	7
9. ELECTRO-OPTICAL CHARACTERISTICS	8
10. INTERFACE DESCRIPTION	10
10.1 PCB overview	10
10.2 Power connector -DC1	11
10.3 HDMI connector -JP5	11
10.4 Touch panel connector -USB-C	11
10.5 Light sensor connector – RT1	12
10.6 Backlight PWM &Power -J5	12
10.7 UART connector -J2	13
10.8 External Keyboard connector - J1	13
11. DISPLAY SPECIFICATION	13
12. CAPACITIVE TOUCH SCREEN PANLE SPECIFICATIONS	13
12.1 Mechanical characteristics	13
12.2 Electrical characteristics	14
13. INSPECTION	14
13.1 Inspection condition	14
13.2 Inspection standard	15
14. RELIABILITY TEST	16
15. LEGAL INFORMATION	17

---

3. MODULE CLASSIFICATION INFORMATION

RV	T	70	H	S	H	N	W	C	00	B
1.	2.	3.	4.	5.	6.	7.	8.	9.	10.	11.

NO.	PARAMETER	SYMBOL
1.	BRAND	RV – Riverdi
2.	PRODUCT TYPE	T – TFT Standard
3.	DISPLAY SIZE	70 – 7.0"
4.	MODEL SERIAL NO.	H – High Brightness, IPS
5.	RESOLUTION	S – 1024 x 600 px
6.	INTERFACE	H – HDMI
7.	FRAME	N – Without Mounting Metal Frame
8.	BACKLIGHT TYPE	W – LED White
9.	TOUCH PANEL	C – With Capacitive Touch Panel, uxTouch
10.	VERSION	00 – (00-99)
11	BONDING TECHNOLOGY	B – Optical bonding

---

4. ASSEMBLY GUIDE

4.1 uxTouch ASSEMBLY

uxTouch are LCD TFT displays with specially designed projected capacitive touch panels. uxTouch display can be mounted without any additional holes in the housing. Our standard uxTouch displays include double-sided adhesive tape (DST) to stick TFT easily to the housing.

uxTouch models with double-side adhesive tape can be mounted by fastening the glass to the housing.

Figure 1. Example of using the support brackets

Figure (described): two 3-D renderings of the module in a blue housing — front view showing the grey active area behind the cover glass, and rear three-quarter view showing the green carrier PCB recessed into the housing with the mounting bracket points marked at the corners.

---

5. MODULE DRAWING

Figure (described): ISO A3 landscape mechanical drawing, scale 1:1.49, dimensions in mm with inches in square brackets. Title block: PN RVT70HSHNWC00-B; DRAWN M.Natywa 2022.01.05; CHECKED Carol Gao 2022.01.13; first-angle projection; P. 1 of 1.

Drawing revision table:

Revision:	Changes:	Date:
1.0	Initial Case	2021.02.11
1.1	Adding Inch Unit	2021.08.25
1.2	PCB Update-Change the touch ZIF connector	2021.08.26
1.3	PCB Update And Dimensions Overhaul	2022.01.05

Front-view horizontal callouts (top group, outermost first):

Dimension	Inches	Meaning
179.96	[7.085]	CG O.D. (cover glass outside dimension)
164.90	[6.492]	TFT O.D.
163.66	[6.443]	SENSOR O.D.
156.68	[6.169]	SENSOR A.A.
155.01	[6.103]	CG V.A.
154.21	[6.071]	TFT A.A.
89.98	[3.543]	— (horizontal centre offset)

Front-view horizontal callouts (right-hand group):

Dimension	Inches
5.90	[0.232]
6.74	[0.265]
11.64	[0.458]
12.475	[0.491]
12.97	[0.511]

Front-view vertical callouts (left group, outermost first):

Dimension	Inches	Meaning
119.00	[4.685]	CG O.D.
100.00	[3.937]	TFT O.D.
98.55	[3.880]	SENSOR O.D.
88.52	[3.485]	SENSOR A.A.
86.72	[3.414]	CG V.A.
85.92	[3.383]	TFT A.A.
59.50	[2.343]	— (vertical centre offset)

Front-view vertical callouts (upper group):

Dimension	Inches
11.58	[0.456]
12.20	[0.480]
15.24	[0.600]
16.14	[0.635]
16.54	[0.651]

Corner radius: 4*R5.00 [R0.197]. Front face annotated BLACK MASK PRINTING RAL9005.

Side-view (thickness) callouts:

Dimension	Inches	Meaning
24.18	[0.952]	MODULE O.D.
7.58	[0.298]	CTP+TFT
2.03	[0.080]	CG+SCA+SENSOR+OCA
1.275	[0.050]	CG+DST
1.10	[0.043]	CG

DETAIL A, SCALE 4:1 — cover glass edge chamfers, both 0.2 [0.008]*45°.

Rear view: carrier PCB with 7.75±0.5 [0.305±0.020] and 7.50±0.5 [0.295±0.020] standoff callouts, 3M9495LE D.S.T (T=0.175mm) and BLACK TAPE T=0.05mm annotations. Connectors labelled around the board edges: J2 (UART), J5 (PWM & POWER), J1 (KEYBOARD EXTENSION), RT1 (Light sensor) along the bottom, and Touch Panel (USB TYPE-C), HDMI, DC along the right. PCB silkscreen shows the pushbutton row PWR / MENU / EXIT / UP / DOWN and the RTD2662 controller. Connector part callouts: MOLEX 53261-0471 (×2), MOLEX 53261-0671, MOLEX 53261-0871.

LED Diagram Circuit: three parallel strings of nine series LEDs between LEDA and LEDK.

LCM NOTES:

1. LCD TYPE: TRANSMISSIVE, NORMALLY BLACK, IPS
2. RESOLUTION: 1024x600
3. VIEWING ANGLE: FREE
4. MODULE SURFACE LUMINANCE: MAX. 850 cd/m^2
5. CONTROLLER IC OF MAIN BOARD: RTD2662
6. VIDEO INTERFACE: HDMI
7. POWER SUPPLY: POWER JACK (7.0-30.0V); USB-C.

TP NOTES:

1. TP STRUCTURE: G+G
2. CG THICKNESS: 1.10 mm
3. DRIVER IC: ILI2132A
4. TOUCH PANEL INTERFACE: USB-C

GENERAL NOTES:

1. OPATICAL BONDING
2. OPERATING TEMPERATURE: -20°C ~ 70°C
3. STORAGE TEMPERATURE: -30°C ~ 80°C
4. WITHOUT INDIVIDUAL TOLERANCE: ±0.3mm
5. RoHS3 COMPLIANT

---

6. ABSOLUTE MAXIMUM RATINGS

PARAMETER	SYMBOL	MIN	MAX	UNIT
Supply Voltage for Module	VDD	7.0	30.0	V
Operating Temperature	TOP	-20	70	°C
Storage Temperature	TST	-30	80	°C
Storage Humidity (@ 25 ± 5°C)	HST	10	90	% RH
Operating Ambient Humidity (@ 25 ± 5°C)	HOP	10	90	% RH

Note. Exceeding maximum values may cause operation or damage to the unit.

7. ELECTRICAL CHARACTERISTICS

PARAMETER	SYMBOL	MIN	TYP	MAX	UNIT	NOTE
Supply Voltage for Module	VDD	7.0	12.0	30.0	V

PARAMETER	SYMBOL	BL 0%	BL 50%	BL 100%	UNIT	NOTE
Current Drawn from VDD@7.0V	IVDD	291	496	748	mA	Note 1
Current Drawn from VDD@12.0V	IVDD	172	289	428	mA	Note 1
Current Drawn from VDD @24.0V	IVDD	93	152	220	mA	Note 1
Current Drawn from VDD @30.0V	IVDD	74	124	178	mA	Note 1
Current drawn from USB-C	IUSB-C	366	692	1156		Note 1, 2

Note 1. BL 0% Current was measured with BL brightness set to 0%,

BL 50% current was measured with BL brightness set to 50%,

BL 100% current was measured with BL brightness set to 100%.

Test condition: ambient temp 25 °C PCAP is on Active mode

Note 2. USB-C interface can be used as a sole power supply for all modules with or without touch panels. If DC1 power jack is used, the power from the USB-C connector is not drawn, as the onboard MOSFET key cuts it off.

8. BACKLIGHT DRIVING CONDITIONS

PARAMETER	SYMBOL	MIN	TYP	MAX	UNIT	NOTE
Backlight Power Consumption	WBL	-	-	2592	mW	100% backlight
Lifetime	-	-	50,000	-	hours	Note 1

Note. Operating life means the period in which the LED brightness goes down to 50% of the initial brightness. Typical operating lifetime is the estimated parameter.

---

9. ELECTRO-OPTICAL CHARACTERISTICS

Optical characteristics are determined after the unit has been 'ON' and stable for approximately 30 minutes in a dark environment at 25 ℃. The values specified are at an approximate distance 500mm from the LCD surface at a viewing angle of Φ and θ equal to 0°.

ITEM	SYMBOL	CONDITION	MIN	TYP	MAX	UNIT	RMK	NOTE
Response Time	Tr+Tf	θ=0° ø=0° Ta=25 °C	-	35	-	ms	FIG 2.	4
Contrast Ratio	Cr	θ=0° ø=0° Ta=25 °C	-	800	-	---	FIG 3.	1
Luminance Uniformity	δ WHITE	θ=0° ø=0° Ta=25 °C	-	75	-	%	FIG 3.	3
Surface Luminance	Lv	θ=0° ø=0° Ta=25 °C	-	850	-	cd/m²	FIG 3.	2
Viewing Angle Range	θ	ø = 90°	-	85	-	deg	FIG 4.	6
Viewing Angle Range	θ	ø = 270°	-	85	-	deg	FIG 4.	6
Viewing Angle Range	θ	ø = 0°	-	85	-	deg	FIG 4.	6
Viewing Angle Range	θ	ø = 180°	-	85	-	deg	FIG 4.	6
CIE (x, y) Chromaticity	Rx	θ=0° ø=0° Ta=25 °C	0.578	0.618	0.658	-	FIG 3.	5
CIE (x, y) Chromaticity	Ry	θ=0° ø=0° Ta=25 °C	0.489	0.329	0.369	-	FIG 3.	5
CIE (x, y) Chromaticity	Gx	θ=0° ø=0° Ta=25 °C	0.376	0.416	0.456	-	FIG 3.	5
CIE (x, y) Chromaticity	Gy	θ=0° ø=0° Ta=25 °C	0.493	0.533	0.573	-	FIG 3.	5
CIE (x, y) Chromaticity	Bx	θ=0° ø=0° Ta=25 °C	0.071	0.111	0.151	-	FIG 3.	5
CIE (x, y) Chromaticity	By	θ=0° ø=0° Ta=25 °C	0.108	0.148	0.188	-	FIG 3.	5
CIE (x, y) Chromaticity	Wx	θ=0° ø=0° Ta=25 °C	0.270	0.310	0.350	-	FIG 3.	5
CIE (x, y) Chromaticity	Wy	θ=0° ø=0° Ta=25 °C	0.290	0.330	0.370	-	FIG 3.	5

Note 1. Contrast Ratio (CR) is defined mathematically as below, for more information see Figure 3.

Contrast Ratio = Average Surface Luminance with all white pixels (P1, P2, P3, P4, P5) ÷ Average Surface Luminance with all black pixels (P1, P2, P3, P4, P5)

Note 2. Surface luminance is the LCD surface from the surface with all pixels displaying white at 100% backlight. For more information see Figure 3.

Lv = Average Surface Luminance with all white pixels (P1, P2, P3, P4, P5)

Note 3. The uniformity in surface luminance δ WHITE is determined by measuring luminance at each test position 1 through 5, and then dividing the minimum luminance of 5 points luminance by maximum luminance of 5 points luminance. For more information see Figure 3.

δ WHITE = Minimum Surface Luminance with all white pixels (P1, P2, P3, P4, P5) ÷ Maximum Surface Luminance with all white pixels (P1, P2, P3, P4, P5)

Note 4. Response time is the time required for the display to transition from white to black (Rise Time, Tr) and from black to white (Decay Time, Tf) as shown in Figure 2. For additional information see Figure 2. The test equipment is BM-7A.

Note 5. CIE (x, y) chromaticity, the x, y value is determined by measuring luminance at each test position 1 through 5, and then calculating the average value.

---

Note 6. For TFT module the contrast ratio is greater than 10. The angles are determined for the horizontal or x axis and the vertical or y axis with respect to the z axis which is normal to LCD surface. For more information see Figure 4.

Note 7. Viewing angle is measured at the center point of the LCD by CONOSCOPE (ergo-80). For response time testing, the testing data is based on BM-7A. Instruments for Contrast Ratio, Surface Luminance, Luminance Uniformity, Chromaticity the test data is based on SR-3A.

Figure 2. The definition of response time

Figure (described): optical response versus time trace. The vertical axis is marked 0%, 10%, 90% and 100%. The trace starts at 100% ("white"), falls through the 90%→10% band in the interval marked Tr, holds at 0% ("black"), then rises back through 10%→90% in a second interval also marked Tr, returning to 100% ("white").

Figure 3. Measuring method for Contrast ratio, surface luminance, Luminance uniformity, CIE (x, y) chromaticity

Figure (described): plan view of the active area with five measurement points — one at the centre and four inset from the corners. Horizontal extent labelled H, vertical extent labelled V, corner insets labelled A (horizontal) and B (vertical). Accompanying legend:

• A: 5mm
• B: 5mm
• H, V: Active Area
• Light spot size ø=5mm, 500mm distance from the LCD surface to detector lens.
• Measurement instrument is TOPCON'S luminance meter BM-5

Figure 4. The definition of viewing angle

Figure (described): isometric sketch of the LCD plane with the z axis normal to the surface at θ=0, the polar angle θ swept from that normal and the azimuth Φ swept in the plane. Azimuth references marked around the panel: Left Φ=90 (12:00), Left Φ=180 (9:00), Right Φ=0 (3:00).

---

10. INTERFACE DESCRIPTION

10.1 PCB overview

Picture below shows the connectors exact placement and their descriptions.

Figure (described): photograph of the populated carrier PCB, component side. Along the top edge, the pushbutton row PWR / MENU / EXIT / UP / DOWN and the RTD2662 controller IC at the right. Along the right edge, highlighted in orange: Touch Panel (USB-C), JP5 (HDMI), DC1 (power jack). Along the bottom edge, highlighted in orange: J2 (UART), J5 (PWM & POWER), J1 (KEYBOARD EXTENSION), RT1 (Light sensor). The DIP switch banks and the ribbon ZIF connector to the panel occupy the board centre.

NAME	CONNECTOR	DESCRIPTION	NOTE
DC1	Power Jack	DC jack, (5.5 mm OD; 2.1mm ID) This is the connector to power on the TFT module. It allows DC for voltage range from 7.0V to 30.0V
JP5	HDMI connector	This is the connector to which you can connect the HDMI signal source to the module.
Touch Panel	USB-C	Touch panel interface for module with touch panel. Also, the USB-C can be used as a power supply for all modules with or without touch panels.
J1	External keyboard connector	Molex 53261-0871 or alternative; Horizontal, 1.25mm pitch; 8 pins. The connector is reserved for external keyboard. Performs the same functions: PWR, MENU, EXIT, UP, DOWN as the pushbuttons on PCB.	Note 1
J5	Backlight PWM & Power	Molex 53261-0671 or alternative; Horizontal, 1.25mm pitch; 6 pins. The unit realizes the function of digital dimming. This connector enables to control backlight PWM externally.	Note 2
J2	UART	Molex 53261-0471 or alternative; Horizontal, 1.25mm pitch; 4 pins. It supports asynchronous serial communication UART port.	Note 3
RT1	Light sensor	Molex 53261-0471; Horizontal, 1.25mmpitch; 4 pins. To connect external light sensor	Note 1

Note 1. Light sensor and external keyboard are optional, not included in the standard kit.

---

Note 2. 4 position-DIP onboard switch SW6 is used to choose the power to backlight. The settings are:

INTERNAL BL PWM: Set 1&2 to OFF, and 3&4 to ON,

EXTERNAL BL PWM: Set 1&2 to ON, and 3&4 to OFF.

Note 3. UART functionality is under development process.

10.2 Power connector -DC1

PIN NO.	SYMBOL	DESCRIPTION
1	VDD	Power supply DC
2	GND	GND

10.3 HDMI connector -JP5

PIN NO.	SYMBOL	DESCRIPTION
1	TMDS Data 2+	TMDS differential signal 2+
2	TMDS Data2 Shield	Data2 shielding ground
3	TMDS Data 2-	TMDS differential signal 2-
4	TMDS Data 1+	TMDS differential signal 1+
5	TMDS Data1 Shield	Data1 shielding ground
6	TMDS Data 1-	TMDS differential signal 1-
7	TMDS Data 0+	TMDS differential signal 0+
8	TMDS Data 0 Shield	Data0 shielding ground
9	TMDS Data 0-	TMDS differential signal 0-
10	TMDS Data Clock+	TMDS differential signal Clock+
11	TMDS Data Shield	Clo6ck shielding ground
12	TMDS Data Clock-	TMDS differential signal Clock-
13	CEC	Electronic protocol CEC
14	NC	No Connection
15	SCL	I²C clock Line
16	SDA	I²C data Line
17	DDC/CEC GND	Data display channel
18	+5V	HDMI 5V
19	Hot Plug Detect	Hot plug Detect

Note 1. Matched Riverdi 4K HDMI cable accessory: 4K HDMI CABLE

10.4 Touch panel connector -USB-C

PIN NO.	SYMBOL	DESCRIPTION
A1	USB_GND	USB_ Ground
B12	USB_GND	USB_ Ground
A4	V_BUS	V_Bus Power; 5V
B9	V_BUS	V_Bus Power; 5V
A5	CC1	Configuration channel
A6	DP1	USB differential pair, position 1, positive
A7	DN1	USB differential pair, position 1, negative
A8	SBU1	Sideband use
B5	CC2	Configuration channel
B6	DP2	USB differential pair, position 2, positive

---

PIN NO.	SYMBOL	DESCRIPTION
B7	DN2	USB differential pair, position 2, negative
B8	SBU2	Configuration channel
A9	V_BUS	V_Bus Power; 5V
B4	V_BUS	V_Bus Power; 5V
A12	USB_GND	USB_Ground
B1	USB_GND	USB_Ground

Note 1. All the signals in Touch panel connector are in accordance with USB-C standard.

Note 2. Matched Riverdi cable accessory: USB-A 2.0 TO USB-C CABLE

10.5 Light sensor connector – RT1

PIN NO.	SYMBOL	DESCRIPTION	NOTE
1	GND	Ground
2	ADC_IN	ADC Input from Light sensor; Maximum input 3.3V
3	NC	No connection
4	Light sensor VDD	Light sensor VDD	Note 1

Note 1. The output voltage ranges from 3.0 V to 3.6 V. The maximum current is 50mA.

Note 2. Matched Riverdi cable accessory: RVA-0104M-1.25FF

10.6 Backlight PWM &Power -J5

PIN NO.	SYMBOL	DESCRIPTION	NOTE
1	GND	Ground
2	GND	Ground
3	EN	Backlight enable, active H
4	PWM	PWM input; 3.3V	Note 1
5	VDD	Power supply 7.0V - 30.0V	Note 2
6	VDD	Power supply 7.0V - 30.0V

Note 1. PWM frequency range: 1kHz - 10kHz

Note 2. Pin 5&6 are internally connected with power connector(DC), VDD.

So, the voltage range is the same as power connector(DC)

Note 3. 4 position-DIP onboard switch SW6 is used to choose the power source to backlight. The settings are:

• a) INTERNAL BL PWM: Set 1&2 to OFF, and 3&4 to ON,
• b) EXTERNAL BL PWM: Set 1&2 to ON, and 3&4 to OFF.

Note 4. Matched Riverdi cable accessory: RVA-0106M-1.25FF-1

---

10.7 UART connector -J2

PIN NO.	SYMBOL	DESCRIPTION	NOTE
1	GND	Ground
2	RXD	Receive Data
3	TXD	Transmit Data
4	VDD_UART	UART VDD	Note 2

Note 1. UART functionality is under development process.

Note 2. The output voltage ranges from 3.0 V to 3.6 V. The maximum current is 50mA.

Note 3. Matched Riverdi cable accessory: RVA-0104M-1.25FF

10.8 External Keyboard connector - J1

PIN NO.	SYMBOL	DESCRIPTION
1	Down	Page down
2	Up	Page up
3	Exit	Exit
4	Menu	Menu
5	PWR	Power on/off
6	LED_EN	LED Enable; Output signal 3.3V
7	GND	Ground
8	Keyboard VDD	Keyboard VDD; Output 3.3V

Note 1. Matched Riverdi cable accessory: RVA-0108M-1.25FF

11. DISPLAY SPECIFICATION

The TFT of the module applies Riverdi high brightness, IPS, 7.0" RGB: RVT70HSTNWC00-B

The supported resolution of the display in this module is 1024*600.

For detailed information, please refer to datasheet of display.

12. CAPACITIVE TOUCH SCREEN PANLE SPECIFICATIONS

12.1 Mechanical characteristics

DESCRIPTION	SPECIFICATION	REMARK
Touch Panel Size	7.0 inch	uxTouch
Outline Dimension of CTP	179.96 mm x 119.00 mm	uxTouch
Product Thickness	2.03 mm	uxTouch
Glass Thickness	1.1 mm	uxTouch
CTP View Area	155.01 mm x 86.72 mm	uxTouch
Sensor Active Area	156.08 mm x 88.42 mm	uxTouch
Structure type	Glass + Glass	uxTouch
Surface Hardness	7H	uxTouch

---

12.2 Electrical characteristics

PARAMETER		SPECIFICATION	REMARK
Power Consumption (IDD)	Active Mode	90 mA	uxTouch
Power Consumption (IDD)	Sleep Mode	10 mA	uxTouch
Linearity		+/-1.5mm	uxTouch
Controller		ILI2132A	uxTouch
Resolution		1024 x 600	uxTouch

13. INSPECTION

Standard acceptance/rejection criteria for TFT module

13.1 Inspection condition

Ambient conditions:

• Temperature: 25 ± 2°C
• Humidity: (60 ± 10) %RH
• Illumination: Single fluorescent lamp non-directive (300 to 700 lux)

Viewing distance: 35 ± 5cm between inspector bare eye and LCD.

Viewing Angle: U/D: 45°/45°, L/R: 45°/45°

Figure (described): isometric sketch of the LCD lying flat with an inspection cone rising from its centre. The cone half-angles are marked 45° either side of the surface normal (the normal itself marked 90° to the panel plane), and the eye position is set 30-40 cm above the panel.

---

13.2 Inspection standard

(One ITEM per block below; each ITEM's CRITERION cell in the original is itself a table, headed by the panel size the criteria apply to.)

ITEM: Black spots, white spots, light leakage, Foreign Particle (round Type)

Figure (described): an ellipse with horizontal extent x and vertical extent y, giving D=(x+y)/2. Spots density: 10 mm.

CRITERION — Size = 7"

Average Diameter	Qualified Qty
D ≤ 0.2 mm	Ignored
0.2 mm < D ≤ 0.3 mm	N≤3
0.5mm < D	Not allowed

ITEM: LCD black spots, white spots, light leakage (line Type)

Figure (described): a curved line defect with its Length and Width dimensioned.

CRITERION — Size = 7"

Length	Width	Qualified Qty
-	W ≤ 0.05	Ignored
L ≤ 5.0	0.05 < W ≤ 0.1	3
5.0 < L	0.1 < W	Not allowed

ITEM: Bright/Dark Dots

CRITERION — Size = 7"

Item	Qualified Qty
Bright dots	N≤2
Dark dots	N≤3
Total bright and dark dots	N≤4

ITEM: Clear spots

CRITERION — Size ≥ 5"

Average Diameter	Qualified Qty
D < 0.2 mm	Ignored
0.2 mm < D < 0.3 mm	4
0.3 mm < D < 0.5 mm	2
0.5 mm < D	0

ITEM: Polarizer bubbles

CRITERION — Size = 7"

Average Diameter	Qualified Qty
D ≤ 0.2 mm	Ignored
0.2 mm < D ≤ 0.5 mm	2
0.5 mm < D	1

ITEM: Touch panel spot

CRITERION — Size ≥ 5"

Average Diameter	Qualified Qty
D < 0.25 mm	Ignored
0.25 mm < D < 0.5 mm	4
0.5 mm < D	0

ITEM: Touch panel White line Scratch

CRITERION — Size ≥ 5"

Length	Width	Qualified Qty
-	W < 0.03	Ignored
L < 5.0	0.03 < W < 0.05	2
-	0.05 < W	0

---

14. RELIABILITY TEST

NO.	TEST ITEM	TEST CONDITION
1	High Temperature Storage	80°C/120 hours
2	Low Temperature Storage	-30°C/120 hours
3	High Temperature Operating	70 °C /120 hours
4	Low Temperature Operating	-20°C/120 hours
5	High Temperature and High Humidity	Humidity 40℃, 90%RH, 120Hrs
6	Thermal Cycling Test (No operation)	-20℃ for 30min, 70℃ for 30 min. 100 cycles. Then test at room temperature after 1 hour
7	Vibration Test	Frequency: 10 ÷ 55 Hz. Stroke: 1.5 mm. Sweep: 10Hz ÷ 55Hz ÷ 10 Hz. 2 hours for each direction of X, Y, Z (Total 6 hours)

Note 1. Sample quantity for each test item is 5 ÷ 10 pcs.

Note 2. Before cosmetic and function test, the product must have enough recovery time, at least 2 hours at room temperature.

---

15. LEGAL INFORMATION

CE marking is usually obligatory only for a complete end product. Riverdi display modules are semi-finished goods which are used as inputs to become part of the finished products.

Therefore, Riverdi display modules are not CE marked.

Riverdi grants the guarantee for the proper operation of the goods for a period of 12 months from the date of possession of the goods. If in a consequence of this guaranteed execution the customer has received the defects-free item as replacement for the defective item, the effectiveness period of this guarantee shall start anew from the moment the customer receives the defects-free item.

Information about device is the property of Riverdi and may be the subject of patents pending or granted. It is not allowed to copy or disclosed this document without prior written permission.

Riverdi endeavors to ensure that all contained information in this document is correct but does not accept liability for any error or omission. Riverdi products are in developing process and published information may be not up to date. Riverdi reserves the right to update and makes changes to Specifications or written material without prior notice at any time. It is important to check the current position with Riverdi.

Images and graphics used in this document are only for illustrative the purpose. All images and graphics are possible to be displayed on the range products of Riverdi, however the quality may vary. Riverdi is no liable to the buyer or to any third party for any indirect, incidental, special, consequential, punitive, or exemplary damages (including without limitation lost profits, lost savings, or loss of business opportunity) relating to any product, service provided or to be provided by Riverdi, or the use or inability to use the same, even if Riverdi has been advised of the possibility of such damages.

Riverdi products are not fault tolerant nor designed, manufactured or intended for use or resale as on line control equipment in hazardous environments requiring fail–safe performance, such as in the operation of nuclear facilities, aircraft navigation or communication systems, air traffic control, direct life support machines or weapons systems in which the failure of the product could lead directly to death, personal injury or severe physical or environmental damage ('High-Risk Activities'). Riverdi and its suppliers specifically disclaim any expressed or implied warranty of fitness for High-Risk Activities. Using Riverdi products and devices in 'High-Risk Activities' and in any other application is entirely at the buyer's risk, and the buyer agrees to defend, indemnify, and hold harmless Riverdi from all damages, claims or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Riverdi intellectual property rights.

---

(Back cover. Riverdi mascot illustration with the speech bubble: "Hi, I am here to help you! If you have any additional questions, please contact our support via email: contact@riverdi.com")