 flamingcow
|
f9140ff8d9
|
Bringup waits for nothing (no sleeps, no link waits, SETs fire cable-or-not with advert readback), errors held off the display while a measure is in flight, status poll is a deadline not a retry count, ghost signals (implausible SNR, undefined ECD verdict) panic outright; persistent stale-pipeline bridge fact documented
|
2026-08-13 10:49:01 -07:00 |
|
|
flamingcow
|
f2891886f3
|
Strip canaries, double-reads, retries and floors from the module protocol; every bcm method holds the per-module lock for its whole operation; facts stay in docs with internal-client contention marked unresolved
|
2026-08-13 10:32:24 -07:00 |
|
|
flamingcow
|
9d1f15045f
|
Shared-mailbox reality: module firmware is its own handler client (internal GET_CURRENT_TEMP ~3.5s, proven idle-watch), handler writes wedge the uC in busy windows; quiet-window writes, bare GETs double-read with CMD-readback tripwire, SNR floor, SETs verified externally; sentinel handshake and wire-probe jumbo check removed
|
2026-08-13 10:19:32 -07:00 |
|
|
flamingcow
|
e99c7121e7
|
Bridged MDIO reads verify freshness: a late async fetch serves the previous response as the wrong register (observed STATUS 0x0004 as 0.4dB SNR); unchanged-or-zero results re-read bare without re-arming until stable, first read always verified, identify retries against the constant PHY ID
|
2026-08-13 08:26:22 -07:00 |
|
|
flamingcow
|
bba1fa5e02
|
Jumbo in the size mix (MTU 9000 + module jumbo pinned), check-first module config trusting GET reads, cable diag async at startup through the reset path, MODULES table dissolved into SETTINGS/LINKS, per-driver NIC counter sets, comment cleanup
|
2026-08-13 08:04:26 -07:00 |
|
|
flamingcow
|
979dc7a772
|
BCM module diagnostics replace timestamp probes: bringup forces EEE off and runs ECD (re-run on every reset, re-baselining past its blip), 1 Hz SNR margin + corrected counters on panel and console; X520 bench divergences bypassed and tracked in open-questions
|
2026-08-13 07:10:39 -07:00 |
|