flamingcow
|
9f2b074c4a
|
Mixed FS+Wiitek test pair: modules dispatched by EEPROM PN to a BCM or Go RollBall client (whitelist panics outside the wiitek proven-safe set), SNR now solely the wiitek's IEEE margins (BCM handler SNR dropped as unactionable), ECD-clears-AN-enable trap found and fixed (7.0 |= 0x1200 on every restart, explicit restart after each diag), mixed roles FS-slave/wiitek-auto-master, window re-arms at taken edge so the one CMD write per window sits far from the poll; X710 rejects the honest FS EEPROM so the noise pair runs Fibergaga+Wiitek
|
2026-08-14 23:35:19 -07:00 |
|
flamingcow
|
9301348850
|
Re-lock the mailbox window on lost phase instead of anchoring blind: one loop goroutine per module owns all transport, windows edge-locked from first touch, bringup verifies both modules before either AN restart; corrected charges and link-down reads print raw registers; harness -fuzz repeats lifecycles judging by exit status (30/30 module-clean)
|
2026-08-13 16:32:14 -07:00 |
|
flamingcow
|
fef6b52b74
|
Force master/slave roles at bringup (A master / B slave, IEEE 7.32): the AN role lottery plus per-training DSP convergence moves per-pair SNR up to ~3.6 dB, so sessions are pinned to identical conditions; launch power documented firmware-pinned (1.130), single-training SNR documented as a weak qualification number
|
2026-08-13 14:23:57 -07:00 |
|
flamingcow
|
a9f10d3055
|
Windowed module protocol: every op admitted inside a 3.4s window after the firmware's observed temp poll (cadence 3.5-4.2s measured, stuck-at-last-fetch stale mechanism proven and avoided), acquire/window with panic on dead heartbeat; noise column shows green on/off cycle phase, cable-missing state unchanged
|
2026-08-13 14:04:16 -07:00 |
|
flamingcow
|
f9140ff8d9
|
Bringup waits for nothing (no sleeps, no link waits, SETs fire cable-or-not with advert readback), errors held off the display while a measure is in flight, status poll is a deadline not a retry count, ghost signals (implausible SNR, undefined ECD verdict) panic outright; persistent stale-pipeline bridge fact documented
|
2026-08-13 10:49:01 -07:00 |
|
flamingcow
|
f2891886f3
|
Strip canaries, double-reads, retries and floors from the module protocol; every bcm method holds the per-module lock for its whole operation; facts stay in docs with internal-client contention marked unresolved
|
2026-08-13 10:32:24 -07:00 |
|
flamingcow
|
9d1f15045f
|
Shared-mailbox reality: module firmware is its own handler client (internal GET_CURRENT_TEMP ~3.5s, proven idle-watch), handler writes wedge the uC in busy windows; quiet-window writes, bare GETs double-read with CMD-readback tripwire, SNR floor, SETs verified externally; sentinel handshake and wire-probe jumbo check removed
|
2026-08-13 10:19:32 -07:00 |
|
flamingcow
|
e99c7121e7
|
Bridged MDIO reads verify freshness: a late async fetch serves the previous response as the wrong register (observed STATUS 0x0004 as 0.4dB SNR); unchanged-or-zero results re-read bare without re-arming until stable, first read always verified, identify retries against the constant PHY ID
|
2026-08-13 08:26:22 -07:00 |
|
flamingcow
|
bba1fa5e02
|
Jumbo in the size mix (MTU 9000 + module jumbo pinned), check-first module config trusting GET reads, cable diag async at startup through the reset path, MODULES table dissolved into SETTINGS/LINKS, per-driver NIC counter sets, comment cleanup
|
2026-08-13 08:04:26 -07:00 |
|
flamingcow
|
979dc7a772
|
BCM module diagnostics replace timestamp probes: bringup forces EEE off and runs ECD (re-run on every reset, re-baselining past its blip), 1 Hz SNR margin + corrected counters on panel and console; X520 bench divergences bypassed and tracked in open-questions
|
2026-08-13 07:10:39 -07:00 |
|