theater/cabletest
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Windowed module protocol: every op admitted inside a 3.4s window after the firmware's observed temp poll (cadence 3.5-4.2s measured, stuck-at-last-fetch stale mechanism proven and avoided), acquire/window with panic on dead heartbeat; noise column shows green on/off cycle phase, cable-missing state unchanged

Browse Source
This commit is contained in:
flamingcow
2026-08-13 14:04:16 -07:00
parent d81594ffbf
commit a9f10d3055
8 changed files with 104 additions and 48 deletions
Download Patch File Download Diff File Expand all files Collapse all files
docs/state.md
+1 -1
View File
@@ -2,7 +2,7 @@
## Committed tree
AF_PACKET raw sockets everywhere (`sock.go`); flow-director steering; per-packet-MAC-rx-stamped rate buckets (`SO_TIMESTAMPING` cmsg, `rx_filter=ALL` as a hard host check — nics/README.md for what that demands of the NIC; **temporarily bypassed** in `ts.go` so BCM work can run on the X520, which cannot stamp — the check reports yellow and the panel rates read zero there; restore to fatal for the product NIC); read-time-stamped NIC-counter rates; test interfaces pinned to MTU 9000 with a 9018-byte jumbo in the size mix (the modules' jumbo path is exercised, not assumed); BCM module diagnostics (`phy.go`, over the patched-ixgbe `sff_i2c` debugfs, compound-op framing; one per-module lock around every whole operation; the firmware's own mailbox use still contends, unresolved — modules/fs/ for the full trap list): bringup identifies both modules and forces EEE off and jumbo on every boot — no trustworthy readback exists and no cable is guaranteed to probe through; the ECD — per-pair verdicts, lengths and pair maps are the length/wiring path — runs through one async path at startup and on every reset, never blocking the UI, with counters re-baselining only after the diag's own link blip so it is never charged to the run; a 1 Hz poller feeds per-pair SNR margin (vs the ≈26.5 dB operating point; green ≥ 3 dB, amber ≥ 1 dB — provisional until the graded-noise run) and the corrected-error set (PCS 3.33 errored blocks/BER, PMA 1.147 fast-retrain count) to the panel and console; framebuffer UI; harness.
AF_PACKET raw sockets everywhere (`sock.go`); flow-director steering; per-packet-MAC-rx-stamped rate buckets (`SO_TIMESTAMPING` cmsg, `rx_filter=ALL` as a hard host check — nics/README.md for what that demands of the NIC; **temporarily bypassed** in `ts.go` so BCM work can run on the X520, which cannot stamp — the check reports yellow and the panel rates read zero there; restore to fatal for the product NIC); read-time-stamped NIC-counter rates; test interfaces pinned to MTU 9000 with a 9018-byte jumbo in the size mix (the modules' jumbo path is exercised, not assumed); BCM module diagnostics (`phy.go`, over the patched-ixgbe `sff_i2c` debugfs, compound-op framing; one per-module lock around every whole operation, and steady-state work time-division-multiplexed with the firmware's own mailbox client — every operation admitted only inside a 3.4 s window after each observed internal temp poll, which ends the stale-read poisoning of the corrected channel — modules/fs/ for the full trap list and validation): bringup identifies both modules and forces EEE off and jumbo on every boot — no trustworthy readback exists and no cable is guaranteed to probe through; the ECD — per-pair verdicts, lengths and pair maps are the length/wiring path — runs through one async path at startup and on every reset, never blocking the UI, with counters re-baselining only after the diag's own link blip so it is never charged to the run; a 1 Hz poller feeds per-pair SNR margin (vs the ≈26.5 dB operating point; green ≥ 3 dB, amber ≥ 1 dB — provisional until the graded-noise run) and the corrected-error set (PCS 3.33 errored blocks/BER, PMA 1.147 fast-retrain count) to the panel and console; framebuffer UI; harness.
## Stashes