theater/cabletest
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Shared-mailbox reality: module firmware is its own handler client (internal GET_CURRENT_TEMP ~3.5s, proven idle-watch), handler writes wedge the uC in busy windows; quiet-window writes, bare GETs double-read with CMD-readback tripwire, SNR floor, SETs verified externally; sentinel handshake and wire-probe jumbo check removed

Browse Source
This commit is contained in:
flamingcow
2026-08-13 10:19:32 -07:00
parent e99c7121e7
commit 9d1f15045f
4 changed files with 204 additions and 190 deletions
Download Patch File Download Diff File Expand all files Collapse all files
docs/state.md
+1 -1
View File
@@ -2,7 +2,7 @@
## Committed tree
AF_PACKET raw sockets everywhere (`sock.go`); flow-director steering; per-packet-MAC-rx-stamped rate buckets (`SO_TIMESTAMPING` cmsg, `rx_filter=ALL` as a hard host check — nics/README.md for what that demands of the NIC; **temporarily bypassed** in `ts.go` so BCM work can run on the X520, which cannot stamp — the check reports yellow and the panel rates read zero there; restore to fatal for the product NIC); read-time-stamped NIC-counter rates; test interfaces pinned to MTU 9000 with a 9018-byte jumbo in the size mix (the modules' jumbo path is exercised, not assumed); BCM module diagnostics (`phy.go`, over the patched-ixgbe `sff_i2c` debugfs, compound-op framing, every bridged read staleness-checked — modules/fs/ for the late-fetch hazard): bringup identifies both modules and checks EEE off and jumbo on (forcing with an AN restart only on mismatch); the ECD — per-pair verdicts, lengths and pair maps are the length/wiring path — runs through one async path at startup and on every reset, never blocking the UI, with counters re-baselining only after the diag's own link blip so it is never charged to the run; a 1 Hz poller feeds per-pair SNR margin (vs the ≈26.5 dB operating point; green ≥ 3 dB, amber ≥ 1 dB — provisional until the graded-noise run) and the corrected-error set (PCS 3.33 errored blocks/BER, PMA 1.147 fast-retrain count) to the panel and console; framebuffer UI; harness.
AF_PACKET raw sockets everywhere (`sock.go`); flow-director steering; per-packet-MAC-rx-stamped rate buckets (`SO_TIMESTAMPING` cmsg, `rx_filter=ALL` as a hard host check — nics/README.md for what that demands of the NIC; **temporarily bypassed** in `ts.go` so BCM work can run on the X520, which cannot stamp — the check reports yellow and the panel rates read zero there; restore to fatal for the product NIC); read-time-stamped NIC-counter rates; test interfaces pinned to MTU 9000 with a 9018-byte jumbo in the size mix (the modules' jumbo path is exercised, not assumed); BCM module diagnostics (`phy.go`, over the patched-ixgbe `sff_i2c` debugfs, compound-op framing; handler writes confined to quiet windows — the µC wedges otherwise — with results double-read, canary-validated, and floor-checked — modules/fs/ for the full trap list): bringup identifies both modules and forces EEE off and jumbo on every boot — no trustworthy readback exists and no cable is guaranteed to probe through; the ECD — per-pair verdicts, lengths and pair maps are the length/wiring path — runs through one async path at startup and on every reset, never blocking the UI, with counters re-baselining only after the diag's own link blip so it is never charged to the run; a 1 Hz poller feeds per-pair SNR margin (vs the ≈26.5 dB operating point; green ≥ 3 dB, amber ≥ 1 dB — provisional until the graded-noise run) and the corrected-error set (PCS 3.33 errored blocks/BER, PMA 1.147 fast-retrain count) to the panel and console; framebuffer UI; harness.
## Stashes