theater/cabletest
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

BCM module diagnostics replace timestamp probes: bringup forces EEE off and runs ECD (re-run on every reset, re-baselining past its blip), 1 Hz SNR margin + corrected counters on panel and console; X520 bench divergences bypassed and tracked in open-questions

Browse Source
This commit is contained in:
flamingcow
2026-08-13 07:10:39 -07:00
parent a00f2216b7
commit 979dc7a772
18 changed files with 1240 additions and 416 deletions
Download Patch File Download Diff File Expand all files Collapse all files
docs/modules/fs/README.md
+2 -2
View File
@@ -27,7 +27,7 @@ Protocol and full verified catalog: [bcm84891l-mdio-commands.md](bcm84891l-mdio-
| Capability | How | Observed |
|---|---|---|
| Per-pair SNR | `CMD_GET_SNR` 0x8030, **invoked bare** (writing the documented DATA1 display flag returns zeros; IEEE 1.133–1.140 never populate — constant 0x8080) | DATA2–5 = SNR A–D ×0.1 dB; ≈ 27–32 dB absolute on bench, 0.1–0.4 dB jitter. 10GBASE-T operating point ≈ 26.5 dB, so margin ≈ value − 26.5 |
| Per-pair SNR | `CMD_GET_SNR` 0x8030, **invoked bare** (writing the documented DATA1 display flag returns zeros; IEEE 1.133–1.140 never populate — constant 0x8080) | DATA2–5 = SNR A–D ×0.1 dB; ≈ 27–32 dB absolute on bench, 0.1–0.4 dB jitter. 10GBASE-T operating point ≈ 26.5 dB, so margin ≈ value − 26.5. cabletest shows the margin classified green ≥ 3 dB / amber ≥ 1 dB / red below — provisional thresholds until the graded-noise correlation run |
| Die temperature | `CMD_GET_CURRENT_TEMP` 0x8031 | ~68–70 °C on bench |
| Supply rails | `GET_CURRENT_VOLTAGE` 0x802F | 0.8 V and 1.88 V rails, tenths of mV |
| Error counters | IEEE PCS 3.32/3.33 — block lock, latched errored-block/BER, clear-on-read | The noise-stress error proxy |
@@ -37,7 +37,7 @@ Protocol and full verified catalog: [bcm84891l-mdio-commands.md](bcm84891l-mdio-
| Item | Command | State |
|---|---|---|
| EEE / AutogrEEEn | 0x8008/0x8009 | Once read 0x0047 (10G AutogrEEEn variable latency + 5G/1G native — local-only, invisible in IEEE 7.60/7.61, which read 0); later reads 0. **Forced all-off** via SET with explicit params `(0, 0, 0x7A12, 0x480, 0)` + AN restart, verified. cabletest should apply this defensively at bringup |
| EEE / AutogrEEEn | 0x8008/0x8009 | Once read 0x0047 (10G AutogrEEEn variable latency + 5G/1G native — local-only, invisible in IEEE 7.60/7.61, which read 0); later reads 0. **Forced all-off** via SET with explicit params `(0, 0, 0x7A12, 0x480, 0)` + AN restart, verified. cabletest applies this defensively at every bringup and verifies 7.60 reads 0 after relink (`phy.go`) |
| EEE wire-truth | arm 0x801A after link-up, read 0x801B | Zero LPI events/duration on idle link; repeat under traffic |
| Fast retrain | 0x800A (datasheet titles it EMI_MODE; description is fast retrain) | Enabled 10G/5G/2.5G; IEEE 1.147 = 0x0019, count bits zero. Keep enabled; read the 1.147 count per run — a marginal cable that fast-retrains still gets counted |
| Pair map | 0x8000 | DATA2 = 0x00E4 = identity (A/B/C/D straight through) — MDI wiring verification works |