Read rx errors from the driver stats array and add the pcs counters

This commit is contained in:
flamingcow
2026-08-04 11:27:30 -07:00
parent 5eea6856fb
commit 49a1a2f829
3 changed files with 219 additions and 44 deletions
+75 -43
View File
@@ -11,22 +11,39 @@ import (
// Split by direction of travel so each counter belongs to exactly one
// direction: the transmitting interface owns the tx fields and the receiving one
// the rx fields. Reading both sets off both interfaces double counts every drop.
var (
nicTxFields = []string{
"tx_errors", "tx_dropped", "tx_fifo_errors",
"tx_carrier_errors", "tx_aborted_errors", "tx_window_errors",
"collisions",
}
nicRxFields = []string{
"rx_errors", "rx_dropped", "rx_crc_errors", "rx_missed_errors",
"rx_length_errors", "rx_over_errors", "rx_frame_errors", "rx_fifo_errors",
}
)
//
// The two sides come from different places, and deliberately not from both at
// once. dev_get_stats adds the core's own drop counts on top of whatever the
// driver reports, so a sysfs field is the driver's counter plus the stack's and
// overlaps any driver counter read beside it.
//
// Sending is the stack's story: what it refused, and what the qdisc discarded
// because we outran it, neither of which the driver ever sees.
var nicTxFields = []string{
"tx_errors", "tx_dropped", "tx_fifo_errors",
"tx_carrier_errors", "tx_aborted_errors", "tx_window_errors",
"collisions",
}
type nicCounters struct {
tx uint64
rx uint64
carrierDown uint64
// Receiving is the hardware's, and is taken from the driver's own array, which
// sysfs both flattens and overlaps: ice folds crc errors and jabbers into
// rx_errors, so the old sum of rx_errors alongside rx_crc_errors charged every
// bad frame check twice. Named individually here, so nothing contains anything
// else in the list.
var nicRxStats = []string{
"rx_crc_errors.nic",
"rx_jabber.nic",
"rx_undersize.nic",
"rx_oversize.nic",
"rx_fragments.nic",
"rx_dropped.nic",
// Below the frame: a 64b/66b block that decoded to no legal symbol, and the
// fault ordered sets the pcs sends when it loses sync. A cable going
// marginal moves these while every frame still arrives intact, which is as
// close to a bit error rate as this link will report.
"illegal_bytes.nic",
"mac_local_faults.nic",
"mac_remote_faults.nic",
}
func readUint(path string) (uint64, bool) {
@@ -41,49 +58,64 @@ func readUint(path string) (uint64, bool) {
return v, true
}
// Every counter here was read once before the test began, so one that stops
// reading now is the interface going away underneath us. Stopping is the only
// honest answer: a tester that quietly gives up counting errors goes on
// reporting a clean link, which is the one lie it must never tell.
func mustReadUint(path string) uint64 {
v, ok := readUint(path)
if !ok {
panic("reading " + path)
}
return v
}
func sumFields(base string, fields []string) uint64 {
var total uint64
for _, f := range fields {
if v, ok := readUint(base + "/statistics/" + f); ok {
total += v
}
total += mustReadUint(base + "/statistics/" + f)
}
return total
}
func readNIC(ifname string) nicCounters {
base := "/sys/class/net/" + ifname
c := nicCounters{
tx: sumFields(base, nicTxFields),
rx: sumFields(base, nicRxFields),
}
c.carrierDown, _ = readUint(base + "/carrier_down_count")
return c
}
// A poll is thirty-odd sysfs attributes and each one costs microseconds of open
// and read, so it runs here rather than on the goroutine that has a frame to
// draw every sixteen milliseconds. Off that path the interval can be short
// enough that an unplugged cable shows up as a link error while the hand is
// still on it.
// A poll is an ioctl and a handful of sysfs attributes, each costing
// microseconds of open and read, so it runs here rather than on the goroutine
// that has a frame to draw every sixteen milliseconds. Off that path the
// interval can be short enough that an unplugged cable shows up as a link error
// while the hand is still on it.
const nicInterval = 200 * time.Millisecond
type nicPoller struct {
txName, rxName string
total *atomic.Uint64
raw uint64
txBase string
rx *statReader
total *atomic.Uint64
raw uint64
}
func newNICPoller(fd int, txName, rxName string, total *atomic.Uint64) (*nicPoller, error) {
rx, err := newStatReader(fd, rxName, nicRxStats)
if err != nil {
return nil, err
}
return &nicPoller{
txBase: "/sys/class/net/" + txName,
rx: rx,
total: total,
}, nil
}
// Carrier is a property of the netdev rather than a counter of either side, and
// is taken from the transmitting interface only: across both directions each
// interface transmits exactly once, so every flap is counted once.
func (p *nicPoller) read() uint64 {
tx := readNIC(p.txName)
rx := readNIC(p.rxName)
return tx.tx + rx.rx + tx.carrierDown
return sumFields(p.txBase, nicTxFields) + p.rx.sum() +
mustReadUint(p.txBase+"/carrier_down_count")
}
// Sysfs nic counters run from boot and restart from zero whenever the driver
// resets its statistics, so only their forward motion is accumulated. Taking
// raw differences instead charges a boot's worth of errors to the first sample
// and turns a reset into a near-2^64 underflow.
// Nic counters run from boot and restart from zero whenever the driver resets
// its statistics, so only their forward motion is accumulated. Taking raw
// differences instead charges a boot's worth of errors to the first sample and
// turns a reset into a near-2^64 underflow.
func (p *nicPoller) poll() {
raw := p.read()
if raw > p.raw {
+14 -1
View File
@@ -48,6 +48,7 @@ type direction struct {
probeSpec *frameSpec
probeTxFD int
probeRxFD int
statFD int
cable *cableStats
// Guards everything the sampler touches. The counters are read on their own
@@ -456,7 +457,18 @@ func buildDirection(label string, tx, rx endpoint, sizes []int, cfg config) (*di
streams: newLossWindows(cfg.streams),
cable: newCableStats(),
}
d.poller = &nicPoller{txName: tx.name, rxName: rx.name, total: &d.nic}
// Held open for the life of the run: the stats ioctl is issued five times a
// second and reopening a socket for each one is pure overhead.
statFD, err := unix.Socket(unix.AF_INET, unix.SOCK_DGRAM, 0)
if err != nil {
return nil, fmt.Errorf("%s stats socket: %w", label, err)
}
d.statFD = statFD
d.poller, err = newNICPoller(statFD, tx.name, rx.name, &d.nic)
if err != nil {
return nil, fmt.Errorf("%s: %w", label, err)
}
d.win = newRateWindow(int(rateWindowSpan/sampleInterval) + 1)
for i := 0; i < cfg.streams; i++ {
@@ -563,6 +575,7 @@ func (d *direction) close() {
}
unix.Close(d.probeTxFD)
unix.Close(d.probeRxFD)
unix.Close(d.statFD)
}
type config struct {
+130
View File
@@ -1,6 +1,7 @@
package main
import (
"bytes"
"encoding/binary"
"fmt"
"os"
@@ -327,6 +328,135 @@ func getCoalesce(fd int, ifname string) (ethtoolCoalesce, error) {
return ec, err
}
const (
ethSSStats = 1
ethGstringLen = 32
)
// Each of these has a __u32 or __u8 tail the kernel fills past the end of the
// struct, so they are only ever the header on a larger buffer.
type ethtoolSsetInfo struct {
cmd uint32
reserved uint32
ssetMask uint64
data [1]uint32
_ [4]byte
}
type ethtoolGstrings struct {
cmd uint32
stringSet uint32
len uint32
}
type ethtoolStatsHdr struct {
cmd uint32
nStats uint32
}
// The stats payload is an array of __u64 immediately after the header, so the
// buffer is allocated as uint64 to guarantee it lands on an eight byte
// boundary. A []byte carries no such guarantee.
func statsBuf(n int) []uint64 { return make([]uint64, n) }
func statCount(fd int, ifname string) (uint32, error) {
req := ethtoolSsetInfo{cmd: unix.ETHTOOL_GSSET_INFO, ssetMask: 1 << ethSSStats}
if err := ethtoolCall(fd, ifname, unsafe.Pointer(&req)); err != nil {
return 0, err
}
// A cleared mask bit means the driver does not have that string set at all,
// in which case no count was written into the tail.
if req.ssetMask == 0 {
return 0, fmt.Errorf("driver has no ETH_SS_STATS string set")
}
return req.data[0], nil
}
func statNames(fd int, ifname string) ([]string, error) {
n, err := statCount(fd, ifname)
if err != nil {
return nil, err
}
if n == 0 {
return nil, fmt.Errorf("driver reports zero statistics")
}
hdrLen := int(unsafe.Sizeof(ethtoolGstrings{}))
buf := statsBuf((hdrLen + int(n)*ethGstringLen + 7) / 8)
hdr := (*ethtoolGstrings)(unsafe.Pointer(&buf[0]))
hdr.cmd = unix.ETHTOOL_GSTRINGS
hdr.stringSet = ethSSStats
hdr.len = n
if err := ethtoolCall(fd, ifname, unsafe.Pointer(&buf[0])); err != nil {
return nil, err
}
raw := unsafe.Slice((*byte)(unsafe.Pointer(&buf[0])), len(buf)*8)[hdrLen:]
names := make([]string, hdr.len)
for i := range names {
s := raw[i*ethGstringLen : (i+1)*ethGstringLen]
if k := bytes.IndexByte(s, 0); k >= 0 {
s = s[:k]
}
names[i] = string(s)
}
return names, nil
}
func statValues(fd int, ifname string, n uint32, into []uint64) error {
hdr := (*ethtoolStatsHdr)(unsafe.Pointer(&into[0]))
hdr.cmd = unix.ETHTOOL_GSTATS
hdr.nStats = n
return ethtoolCall(fd, ifname, unsafe.Pointer(&into[0]))
}
// The ioctl indexes counters by position, and the ordering is a property of the
// driver build, so names are resolved to indices once rather than per poll.
type statReader struct {
fd int
ifname string
n uint32
want []int
buf []uint64
}
func newStatReader(fd int, ifname string, want []string) (*statReader, error) {
names, err := statNames(fd, ifname)
if err != nil {
return nil, fmt.Errorf("%s statistics: %w", ifname, err)
}
idx := make(map[string]int, len(names))
for i, s := range names {
idx[s] = i
}
r := &statReader{
fd: fd,
ifname: ifname,
n: uint32(len(names)),
buf: statsBuf(1 + len(names)),
}
for _, w := range want {
i, ok := idx[w]
if !ok {
return nil, fmt.Errorf("%s has no statistic %q", ifname, w)
}
r.want = append(r.want, i)
}
return r, nil
}
func (r *statReader) sum() uint64 {
if err := statValues(r.fd, r.ifname, r.n, r.buf); err != nil {
panic(fmt.Sprintf("reading %s statistics: %v", r.ifname, err))
}
vals := r.buf[1:]
var total uint64
for _, i := range r.want {
total += vals[i]
}
return total
}
func checkGovernor(want string) checkResult {
res := checkResult{item: "cpu governor"}
paths, err := filepath.Glob("/sys/devices/system/cpu/cpu*/cpufreq/scaling_governor")