artmap/config.example.toml

# artmap configuration
# Run with: go run . -config config.toml [-artnet-listen :6454]

# Target addresses for ArtNet output universes
# Each output universe needs a target IP (broadcast or unicast)
# ArtPoll discovery will be sent to all unique target addresses
[[target]]
universe = "artnet:0.0.0"
address = "2.255.255.255"

[[target]]
universe = "artnet:0.0.5"
address = "10.50.255.255"

# Address format:
#   proto:universe[:channels]
#
# Protocol prefix (required):
#   artnet: - ArtNet protocol
#   sacn:   - sACN/E1.31 protocol
#
# Universe: "net.subnet.universe" or plain number (all 0-indexed, 0-127.0-15.0-15)
# Channels: 1-indexed (1-512), matching DMX convention
#
# From examples:
#   "artnet:0.0.1"        - universe 1, all channels (1-512)
#   "sacn:64:50"          - universe 64, channel 50 only
#   "artnet:0.0.1:50-"    - universe 1, channels 50-512
#   "sacn:1:50-100"       - universe 1, channels 50-100
#
# To examples:
#   "artnet:0.0.1"        - universe 1, starting at channel 1
#   "sacn:1:50"           - universe 1, starting at channel 50

# Remap entire universe
[[mapping]]
from = "artnet:0.0.0"
to = "artnet:0.0.5"

# Channel-level remap for fixture spillover
# Channels 450-512 from universe 0 -> channels 1-63 of universe 1
[[mapping]]
from = "artnet:0.0.0:450-512"
to = "artnet:0.0.1:1"

# Using plain universe numbers
[[mapping]]
from = "artnet:2"
to = "artnet:10"

# Multiple outputs from same source
[[mapping]]
from = "artnet:0.0.3"
to = "artnet:0.0.7"

[[mapping]]
from = "artnet:0.0.3"
to = "artnet:0.0.8"

# Output to sACN instead of ArtNet
[[mapping]]
from = "artnet:0.0.4"
to = "sacn:1"

# Convert sACN input to ArtNet output
[[mapping]]
from = "sacn:5"
to = "artnet:0.0.5"