cpp/liburing
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
87ec82f00f58fc7688d8863b8e795c4957516098
liburing/man/io_uring_enter.2
Jens Axboe 87ec82f00f man/io_uring_enter: mention that SQE entries are always fully consumed 
With a recent change to the kernel side, we now fully guarantee that
once io_uring_enter(2) returns that X entries have been submitted, it's
completely safe to reuse tohse entries. This used to not always be the
case, if an SQE had to be punted to async context for submission.

This makes for a more reliable and nicer interface.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-10 15:54:30 -07:00

421 lines
10 KiB
Groff
Raw Blame History

.\" Copyright (C) 2019 Jens Axboe <axboe@kernel.dk>
.\" Copyright (C) 2019 Red Hat, Inc.
.\"
.\" %%%LICENSE_START(LGPL_V2.1)
.\" This file is distributed according to the GNU Lesser General Public License.
.\" %%%LICENSE_END
.\"
.TH IO_URING_ENTER 2 2019-01-22 "Linux" "Linux Programmer's Manual"
.SH NAME
io_uring_enter \- initiate and/or complete asynchronous I/O
.SH SYNOPSIS
.nf
.BR "#include <linux/io_uring.h>"
.PP
.BI "int io_uring_enter(unsigned int " fd ", unsigned int " to_submit ,
.BI " unsigned int " min_complete ", unsigned int " flags ,
.BI " sigset_t *" sig);
.fi
.PP
.SH DESCRIPTION
.PP
.BR io_uring_enter ()
is used to initiate and complete I/O using the shared submission and
completion queues setup by a call to
.BR io_uring_setup(2).
A single call can both submit new I/O and wait for completions of I/O
initiated by this call or previous calls to
.BR io_uring_enter ().
.I fd
is the file descriptor returned by
.BR io_uring_setup(2).
.I to_submit
specifies the number of I/Os to submit from the submission queue. If
the
.B IORING_ENTER_GETEVENTS
bit is set in
.I flags,
then the system call will attempt to wait for
.I min_events
I/O completions. Note that it is valid to specify
.B IORING_ENTER_GETEVENTS
in
.I flags
and pass in
.I min_complete
as 0 at the same time. This allows the kernel to return already
completed events without waiting. This is useful only when the
io_uring instance was configured for polling (by specifying the
.B IORING_SETUP_IOPOLL
flag in
.BR io_uring_setup(2)),
as for IRQ driven I/O, the application can just check the completion
queue without entering the kernel.
.PP
When the system call returns that a certain amount of SQEs have been
consumed and submitted, it's safe to reuse SQE entries in the ring. This is
true even if the actual IO submission had to be punted to async context,
which means that the SQE may in fact not have been submitted yet. If the
kernel requires later use of a particular SQE entry, it will have made a
private copy of it.
.I sig
is a pointer to a signal mask (see
.BR sigprocmask (2)); if
.I sig
is not NULL,
.BR io_uring_enter ()
first replaces the current signal mask by the one pointed to by
.I sig,
then waits for events to become available in the completion queue, and
then restores the original signal mask. The following
.BI io_uring_enter ()
call:
.PP
.in +4n
.EX
ret = io_uring_enter(fd, 0, 1, IORING_ENTER_GETEVENTS, &sig);
.EE
.in
.PP
is equivalent to
.I atomically
executing the following calls:
.PP
.in +4n
.EX
pthread_sigmask(SIG_SETMASK, &sig, &orig);
ret = io_uring_enter(fd, 0, 1, IORING_ENTER_GETEVENTS, NULL);
pthread_sigmask(SIG_SETMASK, &orig, NULL);
.EE
.in
.PP
See the description of
.BR pselect (2)
for an explanation of why the
.I sig
parameter is necessary.
Submission queue entries are represented using the following data
structure:
.PP
.in +4n
.EX
/*
* IO submission data structure (Submission Queue Entry)
*/
struct io_uring_sqe {
__u8 opcode; /* type of operation for this sqe */
__u8 flags; /* IOSQE_ flags */
__u16 ioprio; /* ioprio for the request */
__s32 fd; /* file descriptor to do IO on */
__u64 off; /* offset into file */
__u64 addr; /* pointer to buffer or iovecs */
__u32 len; /* buffer size or number of iovecs */
union {
__kernel_rwf_t rw_flags;
__u32 fsync_flags;
__u16 poll_events;
};
__u64 user_data; /* data passed back at completion time */
union {
__u16 buf_index; /* index into fixed buffers, if used */
__u64 __pad2[3];
};
};
.EE
.in
.PP
The
.I opcode
describes the operation to be performed. It can be one of:
.TP
.BR IORING_OP_NOP
Do not perform any I/O. This is useful for testing the performance of
the io_uring implementation itself.
.TP
.BR IORING_OP_READV
.TP
.BR IORING_OP_WRITEV
Vectored read and write operations, similar to
.BR preadv2(2)
and
.BR pwritev2(2).
.TP
.BR IORING_OP_READ_FIXED
.TP
.BR IORING_OP_WRITE_FIXED
Read from or write to pre-mapped buffers. See
.BR io_uring_register(2)
for details on how to setup a context for fixed reads and writes.
.TP
.BR IORING_OP_FSYNC
File sync. See also
.BR fsync(2).
Note that, while I/O is initiated in the order in which it appears in
the submission queue, completions are unordered. For example, an
application which places a write I/O followed by an fsync in the
submission queue cannot expect the fsync to apply to the write. The
two operations execute in parallel, so the fsync may complete before
the write is issued to the storage. The same is also true for
previously issued writes that have not completed prior to the fsync.
.TP
.BR IORING_OP_POLL_ADD
Poll the
.I fd
specified in the submission queue entry for the events
specified in the
.I poll_events
field. Unlike poll or epoll without
.B EPOLLONESHOT,
this interface always works in one shot mode. That is, once the poll
operation is completed, it will have to be resubmitted.
.TP
.BR IORING_OP_POLL_REMOVE
Remove an existing poll request. If found, the
.I res
field of the
.I struct io_uring_cqe
will contain 0. If not found,
.I res
will contain
.B -ENOENT.
.PP
The
.I flags
field is a bit mask. Currently, the only supported flag is
.B IOSQE_FIXED_FILE.
When this flag is specified,
.I fd
is an index into the files array registered with the io_uring instance (see the
.B IORING_REGISTER_FILES
section of the
.BR io_uring_register(2)
man page).
.I ioprio
specifies the I/O priority. See
.BR ioprio_get(2)
for a description of Linux I/O priorities.
.I fd
specifies the file descriptor against which the operation will be
performed, with the exception noted above.
If the operation is one of
.B IORING_OP_READ_FIXED
or
.B IORING_OP_WRITE_FIXED,
.I addr
and
.I len
must fall within the buffer located at
.I buf_index
in the fixed buffer array. If the operation is either
.B IORING_OP_READV
or
.B IORING_OP_WRITEV,
then
.I addr
points to an iovec array of
.I len
entries.
.I rw_flags,
specified for read and write operations, contains a bitwise OR of
per-I/O flags, as described in the
.BR preadv2(2)
man page.
The
.I fsync_flags
bit mask may contain either 0, for a normal file integrity sync, or
.B IORING_FSYNC_DATASYNC
to provide data sync only semantics. See the descriptions of
.B O_SYNC
and
.B O_DSYNC
in the
.BR open(2)
manual page for more information.
The bits that may be set in
.I poll_events
are defined in \fI<poll.h>\fP, and documented in
.BR poll(2).
.I user_data
is an application-supplied value that will be copied into
the completion queue entry (see below).
.I buf_index
is an index into an array of fixed buffers, and is only valid if fixed
buffers were registered
.PP
Once the submission queue entry is initialized, I/O is submitted by
placing the index of the submission queue entry into the tail of the
submission queue. After one or more indexes are added to the queue,
and the queue tail is advanced, the io_uring_enter(2) system call can
be invoked to initiate the I/O.
Completions use the following data structure:
.PP
.in +4n
.EX
/*
* IO completion data structure (Completion Queue Entry)
*/
struct io_uring_cqe {
__u64 user_data; /* sqe->data submission passed back */
__s32 res; /* result code for this event */
__u32 flags;
};
.EE
.in
.PP
.I user_data
is copied from the field of the same name in the submission queue
entry. The primary use case is to store data that the application
will need to access upon completion of this particular I/O. The
.I flags
bit mask may contain 0 or more of the following values, ORed together:
.TP
.BR IOCQE_FLAG_CACHEHIT
The page(s) associated with the buffered I/O operation were present in
the page cache.
.I res
is the operation-specific result.
.PP
For read and write opcodes, the
return values match those documented in the
.BR preadv2(2)
and
.BR pwritev2(2)
man pages.
Return codes for the io_uring-specific opcodes are documented in the
description of the opcodes above.
.PP
.SH RETURN VALUE
.BR io_uring_enter ()
returns the number of I/Os successfully submitted. This can be zero
if
.I to_submit
was zero, if there were invalid entries in the submission queue, or if
the submission queue was empty.
On error, -1 is returned and
.I errno
is set appropriately.
.PP
.SH ERRORS
.TP
.BR EAGAIN
The kernel was unable to allocate memory for the request.
.TP
.BR EBADF
The
.I fd
field in the submission queue entry is invalid, or the
.B IOSQE_FIXED_FILE
flag was set in the submission queue entry, but no files were registered
with the io_uring instance
.TP
.BR EFAULT
buffer is outside of the process' accessible address space
.TP
.BR EFAULT
.B IORING_OP_READ_FIXED
or
.B IORING_OP_WRITE_FIXED
was specified in the
.I opcode
field of the submission queue entry, but either buffers were not
registered for this io_uring instance, or the address range described
by
.I addr
and
.I len
does not fit within the buffer registered at
.I buf_index
.TP
.BR EINVAL
The
.I index
member of the submission queue entry is invalid.
.TP
.BR EINVAL
the
.I flags
field or
.I opcode
in a submission queue entry is invalid
.TP
.BR EINVAL
.B IORING_OP_NOP
was specified in the submission queue entry, but the io_uring context
was setup for polling (
.B IORING_SETUP_IOPOLL
was specified in the call to io_uring_setup)
.TP
.BR EINVAL
.B IORING_OP_READV
or
.B IORING_OP_WRITEV
was specified in the submission queue entry, but the io_uring instance
has fixed buffers registered.
.TP
.BR EINVAL
.B IORING_OP_READ_FIXED
or
.B IORING_OP_WRITE_FIXED
was specified in the submission queue entry, and the
.I buf_index
is invalid
.TP
.BR EINVAL
.B IORING_OP_READV, IORING_OP_WRITEV, IORING_OP_READ_FIXED,
.B IORING_OP_WRITE_FIXED
or
.B IORING_OP_FSYNC
was specified in the submission queue entry, but the io_uring instance
was configured for IOPOLLing, or any of
.I addr, ioprio, off, len,
or
.I buf_index
was set in the submission queue entry.
.TP
.BR EINVAL
.B IORING_OP_POLL_ADD
or
.B IORING_OP_POLL_REMOVE
was specified in the
.I opcode
field of the submission queue entry, but the io_uring instance was
configured for busy-wait polling
.B (IORING_SETUP_IOPOLL),
or any of
.I ioprio, off, len
or
.I buf_index
was non-zero in the submission queue entry.
.TP
.BR EINVAL
.B IORING_OP_POLL_ADD
was specified in the
.I opcode
field of the submission queue entry, and the
.I addr
field was non-zero.
.TP
.BR ENXIO
the io_uring instance is in the process of being torn down
.TP
.BR EOPNOTSUPP
.I fd
does not refer to an io_uring instance
Reference in New Issue View Git Blame Copy Permalink