Initial commit

2024-07-03 22:04:09 -07:00
parent 205d9b95bd
commit ee10afaf26
5 changed files with 219 additions and 0 deletions
--- a/prusa_enclosure_mount_top_right.scad
+++ b/prusa_enclosure_mount_top_right.scad
@@ -0,0 +1,71 @@
+use <spoolmount_a.scad>
+
+module prusa_enclosure_mount_top_right() {
+    spoolmount_a();
+
+    rotate([0, 0, 45])
+    difference() {
+        union() {
+            for (o = [-20, 20]) {
+                translate([0, o, 0])
+                difference() {
+                    // Side body
+                    hull() {
+                        for (x = [30, 127]) {
+                            for (y = [-7, 7]) {
+                                translate([x, y, 2.5])
+                                scale([0.7, 0.7, 1.0])
+                                sphere(d=5, $fn=50);
+                            }
+                        }
+                    }
+                    
+                    // Through screw hole
+                    translate([120, 0, -1])
+                    cylinder(h=7, d=3.2, $fn=50);
+                    
+                    // Hex nut / screw head cutout 
+                    translate([120, 0, 3.7])
+                    linear_extrude(2.61, center=true)
+                    polygon(points=[
+                        [-2.8, 1.6175],
+                        [0, 3.235],
+                        [2.8, 1.6175],
+                        [2.8, -1.6175],
+                        [0, -3.235],
+                        [-2.8, -1.6175],
+                    ]);
+                }
+            }
+
+            // Center body
+            hull() {
+                for (x = [30, 115]) {
+                    for (y = [-25, 25]) {
+                        translate([x, y, 2.5])
+                        scale([0.7, 0.7, 1.0])
+                        sphere(d=5, $fn=50);
+                    }
+                }
+            }
+        }
+        
+        // Weight reduction holes rows 1/3/5
+        for (x = [49 : 12 : 105]) {
+            for (y = [-20 : 20 : 20]) {
+                translate([x, y, -1])
+                cylinder(h=7, d=9, $fn=50);
+            }
+        }
+        
+        // Weight reduction holes rows 2/4
+        for (x = [54.5 : 12 : 105]) {
+            for (y = [-10 : 20 : 10]) {
+                translate([x, y, -1])
+                cylinder(h=7, d=9, $fn=50);
+            }
+        }
+    }
+}
+
+prusa_enclosure_mount_top_right();