diff --git a/v1/scad/lib/generic/extension-twist.scad b/v1/scad/lib/generic/extension-twist.scad
index 8bc657d..2b6b9c2 100644
--- a/v1/scad/lib/generic/extension-twist.scad
+++ b/v1/scad/lib/generic/extension-twist.scad
@@ -1,4 +1,4 @@
-use <spoolmount_twist.scad>
+use <spoolmount-twist.scad>
 
 module extension_twist(h, twist) {
     assert(h >= 10, "minimum extension_twist height is 10");
diff --git a/v1/scad/lib/generic/ptfe-guide-4.scad b/v1/scad/lib/generic/ptfe-guide-4.scad
index 6b95cd0..4a3a53a 100644
--- a/v1/scad/lib/generic/ptfe-guide-4.scad
+++ b/v1/scad/lib/generic/ptfe-guide-4.scad
@@ -1,4 +1,4 @@
-use <../util/screw_hole_m3.scad>
+use <../util/screw-hole-m3.scad>
 
 module ptfe_guide_4() {
     translate([0, 0, 5])
diff --git a/v1/scad/lib/generic/spool-holder-twist.scad b/v1/scad/lib/generic/spool-holder-twist.scad
index f888714..e2fece5 100644
--- a/v1/scad/lib/generic/spool-holder-twist.scad
+++ b/v1/scad/lib/generic/spool-holder-twist.scad
@@ -1,4 +1,4 @@
-use <spoolmount_twist.scad>
+use <spoolmount-twist.scad>
 use <../util/torus.scad>
 
 module spool_holder_twist(h) {
diff --git a/v1/scad/lib/prusa-enclosure/mount.scad b/v1/scad/lib/prusa-enclosure/mount.scad
index 45d8bbb..2cb33f4 100644
--- a/v1/scad/lib/prusa-enclosure/mount.scad
+++ b/v1/scad/lib/prusa-enclosure/mount.scad
@@ -1,5 +1,5 @@
 use <../generic/spoolmount.scad>
-use <../util/screw_hole_m3.scad>
+use <../util/screw-hole-m3.scad>
 use <../util/torus.scad>
 
 module prusa_enclosure_mount(angle, h=10) {
diff --git a/v1/scad/objects/generic/extension-clip-25mm.scad b/v1/scad/objects/generic/extension-clip-25mm.scad
index 38c0a34..74e364a 100644
--- a/v1/scad/objects/generic/extension-clip-25mm.scad
+++ b/v1/scad/objects/generic/extension-clip-25mm.scad
@@ -1,3 +1,3 @@
-use <../../lib/generic/extension_clip.scad>
+use <../../lib/generic/extension-clip.scad>
 
 extension_clip(h=25);
\ No newline at end of file
diff --git a/v1/scad/objects/generic/extension-twist-ccw-25mm.scad b/v1/scad/objects/generic/extension-twist-ccw-25mm.scad
index 7d7b677..5643b47 100644
--- a/v1/scad/objects/generic/extension-twist-ccw-25mm.scad
+++ b/v1/scad/objects/generic/extension-twist-ccw-25mm.scad
@@ -1,3 +1,3 @@
-use <../../lib/generic/extension_twist.scad>
+use <../../lib/generic/extension-twist.scad>
 
 extension_twist(h=25, twist=30);
\ No newline at end of file
diff --git a/v1/scad/objects/generic/extension-twist-cw-25mm.scad b/v1/scad/objects/generic/extension-twist-cw-25mm.scad
index 5a5c6c9..3ffeb98 100644
--- a/v1/scad/objects/generic/extension-twist-cw-25mm.scad
+++ b/v1/scad/objects/generic/extension-twist-cw-25mm.scad
@@ -1,3 +1,3 @@
-use <../../lib/generic/extension_twist.scad>
+use <../../lib/generic/extension-twist.scad>
 
 extension_twist(h=25, twist=-30);
\ No newline at end of file
diff --git a/v1/scad/objects/generic/ptfe-guide-4.scad b/v1/scad/objects/generic/ptfe-guide-4.scad
index b79afe1..52ced53 100644
--- a/v1/scad/objects/generic/ptfe-guide-4.scad
+++ b/v1/scad/objects/generic/ptfe-guide-4.scad
@@ -1,3 +1,3 @@
-use <../../lib/generic/ptfe_guide_4.scad>
+use <../../lib/generic/ptfe-guide-4.scad>
 
 ptfe_guide_4();
\ No newline at end of file
diff --git a/v1/scad/objects/generic/spool-cage.scad b/v1/scad/objects/generic/spool-cage.scad
index 534c3b1..01cde25 100644
--- a/v1/scad/objects/generic/spool-cage.scad
+++ b/v1/scad/objects/generic/spool-cage.scad
@@ -1,3 +1,3 @@
-use <../../lib/generic/spool_cage.scad>
+use <../../lib/generic/spool-cage.scad>
 
 spool_cage();
\ No newline at end of file
diff --git a/v1/scad/objects/prusa-enclosure/mount-corner.scad b/v1/scad/objects/prusa-enclosure/mount-corner.scad
index 9d79ff9..710d13f 100644
--- a/v1/scad/objects/prusa-enclosure/mount-corner.scad
+++ b/v1/scad/objects/prusa-enclosure/mount-corner.scad
@@ -1,3 +1,3 @@
-use <../../lib/prusa_enclosure/mount.scad>
+use <../../lib/prusa-enclosure/mount.scad>
 
 prusa_enclosure_mount(angle=15);
diff --git a/v1/scad/objects/prusa-enclosure/washer.scad b/v1/scad/objects/prusa-enclosure/washer.scad
index 2ec0904..b896485 100644
--- a/v1/scad/objects/prusa-enclosure/washer.scad
+++ b/v1/scad/objects/prusa-enclosure/washer.scad
@@ -1,3 +1,3 @@
-use <../../lib/prusa_enclosure/washer.scad>
+use <../../lib/prusa-enclosure/washer.scad>
 
 prusa_enclosure_mount_washer();
\ No newline at end of file