Port spoolmount library refactor: add bump, consolidate extension_twist, drop clip variant

v1/scad/lib/generic/extension-clip.scad

@@ -1,43 +0,0 @@
-use <spoolmount.scad>
-
-module extension_clip(h) {
-    assert(h >= 14, "minimum extension_clip height is 14");
-
-    // Bottom spoolmount
-    spoolmount();
-
-    // Top spoolmount
-    translate([0, 0, h - 5])
-    spoolmount();
-
-    translate([0, 0, 4]) {
-        // Inner center cylinder
-        difference() {
-            cylinder(h=h - 8, r=29, $fn=200);
-
-            translate([0, 0, -1])
-            cylinder(h=h - 6, r=25.1, $fn=200);
-        }
-
-        difference() {
-            cylinder(h=h - 8, r=42, $fn=200);
-
-            translate([0, 0, -1])
-            cylinder(h=h - 6, r=37, $fn=200);
-        }
-    }
-
-    // Expansion to support top spoolmount
-    translate([0, 0, h - 9])
-    rotate_extrude($fn=200)
-    polygon(points=[
-        [29, 0],
-        [29, 5],
-        [37, 5],
-        [37, 0],
-        [33, 4],
-        [29, 0],
-    ]);
-}
-
-extension_clip(h=25);

v1/scad/lib/generic/extension-twist.scad

@@ -1,6 +1,6 @@
 use <spoolmount-twist.scad>
 
-module extension_twist(h, twist) {
+module extension_twist(h) {
     assert(h >= 10, "minimum extension_twist height is 10");
 
     // Bottom spoolmount twist
@@ -8,7 +8,7 @@ module extension_twist(h, twist) {
 
     // Top spoolmount twist
     translate([0, 0, h])
-    rotate([180, 0, twist])
+    rotate([180, 0, 90])
     spoolmount_twist();
 
     difference() {
@@ -27,4 +27,4 @@ module extension_twist(h, twist) {
     }
 }
 
-extension_twist(h=25, twist=30);
+extension_twist(h=25);

v1/scad/lib/generic/spoolmount-bump.scad

@@ -0,0 +1,48 @@
+module spoolmount_hook() {
+    difference() {
+        // Hook body
+        linear_extrude(9) {
+            polygon(points=[
+                [0, 0],
+                [0, 12],
+                [1, 12],
+                [3, 10],
+                [7, 10],
+                [9, 12],
+                [10, 12],
+                [10, 8],
+                [8, 6],
+                [5, 6],
+                [5, 2],
+                [3, 2],
+                [1, 0],
+            ]);
+
+            translate([8, 8])
+            circle(r=2, $fn=50);
+        }
+
+        // Corner cutouts
+        {
+            translate([9, 10.5, -0.5])
+            rotate([90, 0, 90])
+            linear_extrude(3, center=true)
+            polygon(points=[
+                [0, 0],
+                [2, 0],
+                [2, 2],
+            ]);
+
+            translate([9, 10.5, 9.5])
+            rotate([-90, 0, 90])
+            linear_extrude(3, center=true)
+            polygon(points=[
+                [0, 0],
+                [2, 0],
+                [2, 2],
+            ]);
+        }
+    }
+}
+
+spoolmount_hook();

v1/scad/lib/generic/spoolmount-twist.scad

@@ -30,7 +30,7 @@ module spoolmount_twist() {
                     }
                 }
 
-                for (a = [45 : 90 : 335]) {
+                for (a = [45 : 180 : 335]) {
                     // Slide bump entrance cutout
                     rotate([0, 0, a - 13])
                     rotate_extrude(angle=26, $fn=200)
@@ -43,8 +43,8 @@ module spoolmount_twist() {
                     ]);
 
                     // Slide cutout
-                    rotate([0, 0, a - 40])
+                    rotate([0, 0, a - 55])
-                    rotate_extrude(angle=80, $fn=200)
+                    rotate_extrude(angle=110, $fn=200)
                     translate([23, 0, 0])
                     polygon(points=[
                         [3, 0.5],
@@ -66,7 +66,7 @@ module spoolmount_twist() {
                 cylinder(h=4, r=25, $fn=200);
 
                 for (a = [45 : 90 : 335]) {
-                    for (o = [-19.15, 19.15]) {
+                    for (o = [-34.15, 34.15]) {
                         rotate([0, 0, a + o])
                         translate([0, 23.9, 0]) {
                             translate([0, 0, 1])
@@ -83,9 +83,9 @@ module spoolmount_twist() {
         }
 
         // Rounded cutouts
-        for (a = [45 : 90 : 335]) {
+        for (a = [45 : 180 : 335]) {
-            for (o = [-40, -20, 20, 40]) {
+            for (o = [-55, -35, 35, 55]) {
-                rotate([0, 0, a + o])
+                rotate([0, 0, a + 90 + o])
                 translate([0, 30.5, 0])
                 scale([0.2, 1.0, 1.0])
                 rotate_extrude($fn=200)

v1/scad/lib/generic/spoolmount.scad

@@ -42,7 +42,16 @@ module spoolmount(h=5) {
                     [-4, 2],
                     [-4, -1],
                 ]);
-
+                
+                rotate([90, 0, 90])
+                linear_extrude(4, center=true)
+                polygon(points=[
+                    [-6, -1],
+                    [-4, 1],
+                    [4, 1],
+                    [6, -1],
+                ]);
+                
                 // Access cutout
                 if (h > 5) {
                     difference() {
@@ -78,7 +87,7 @@ module spoolmount(h=5) {
     intersection() {
         cylinder(h=5, r=25.1, $fn=200);
 
-        for (a = [45 : 90 : 335]) {
+        for (a = [45 : 180 : 335]) {
             // Locking bumps
             rotate([0, 0, a - 10])
             rotate_extrude(angle=20, $fn=200)
@@ -93,7 +102,7 @@ module spoolmount(h=5) {
 
             // Rounded bump ends
             for (o = [-10, 10]) {
-                rotate([0, 0, a + o])
+                rotate([0, 0, a + 90 + o])
                 translate([0, 30.1, 0])
                 scale([0.2, 1.0, 1.0])
                 rotate_extrude($fn=200)

v1/scad/objects/generic/extension-clip-25mm.scad

@@ -1,3 +0,0 @@
-use <../../lib/generic/extension-clip.scad>
-
-extension_clip(h=25);

v1/scad/objects/generic/extension-twist-25mm.scad

@@ -1,3 +1,3 @@
 use <../../lib/generic/extension-twist.scad>
 
-extension_twist(h=25, twist=30);
+extension_twist(h=25);

v1/scad/objects/generic/extension-twist-cw-25mm.scad

@@ -1,3 +0,0 @@
-use <../../lib/generic/extension-twist.scad>
-
-extension_twist(h=25, twist=-30);