forts/clip.scad

$fn = 300;

outer = 25.9;

part = "b";

if (part == "a" || part == "*") {
    difference() {
        assembly();
        clips(mask=true);
    }
} 

if (part == "b" || part == "*") {
    intersection() {
        assembly();
        clips(mask=true);
    }
}


module tenten() {
    color("red")
    union() {
        difference() {
            hull() {
                for (x=[0.75, outer - 0.75], y=[0.75, outer - 0.75])
                translate([x, y, 0]) {
                    cylinder(h=30, r=0.75);
                }
            }
            
            for (t=[[-1, (outer - 9) / 2], [outer - 1.0, (outer - 9) / 2]])
            translate([t[0], t[1], -1])
            cube([2, 9, 32]);
                
            for (t=[[-1, (outer - 9) / 2], [outer - 3, (outer - 9) / 2]])
            translate([t[0], t[1] + 1.1, -1])
            cube([4, 6.8, 32]);
            
            for (t=[[(outer - 9) / 2, -1], [(outer - 9) / 2, outer - 1.0]])
            translate([t[0], t[1], -1])
            cube([9, 2, 32]);
            
            for (t=[[(outer - 9) / 2, -1], [(outer - 9) / 2, outer - 3]])
            translate([t[0] + 1.1, t[1], -1])
            cube([6.8, 4, 32]);
        }
        
        for (x=[(outer - 9) / 2,(outer - 9) / 2 + 9], y=[1.1,outer-1.1]) {
            translate([x, y, 0])
            cylinder(h=30, d=2.2);
            
            translate([y, x, 0])
            cylinder(h=30, d=2.2);
        }
    }
}

module assembly() {
    difference() {
        union() {
            hull() {
                for (x=[1, outer + 3], y=[1, outer])
                translate([x, y, 0])
                cylinder(h=12, r=1.4);
            }
            
            hull() {
                for (x=[1.7, outer + 2.3], y=[1.7, outer - 0.7])
                translate([x, y, 0])
                cylinder(h=20, r=1.2);
            }
        }
        
        translate([2, -1.01, -1])
        tenten();
        
        translate([10, -1, -1])
        cube([15, 5, 30]);
    }
    
    clips();
}


module clips(mask=false) {
    translate([-3.51, 1, 0]) {
        if (mask) {
            clipmask();
        } else {
            clip();
        }
    }

    translate([outer + 7.51, 1, 0])
    mirror([1, 0, 0]) {
        if (mask) {
            clipmask();
        } else {
            clip();
        }
    }

    translate([3, outer + 4.5, 0])
    rotate([0, 0, -90]) {
        if (mask) {
            clipmask();
        } else {
            clip();
        }
    }

    translate([27, outer + 9.5, 0])
    mirror([1, 0, 0])
    rotate([0, 0, -90]) {
        if (mask) {
            clipmask();
        } else {
            clip();
        }
    }
}

module clip() {
    difference() {
        hull() {
            for (y=[0, 20])
            translate([0, y, 0]) {
                translate([1, 2, 0])
                cylinder(h=12, d=4);
                
                translate([1, 0, 0])
                cube([4, 4, 12]);
            }
        }
        
        translate([1.2, -1.75, -1])
        rotate([0, 0, 25])
        cube([2.4, 2, 14]);
        
        for (y=[0.8:1.7:18])
        translate([2.4, y, -1])
        rotate([0, 0, 65])
        cube([0.5, 2.0, 14]);
        
        for (y=[0.4:1.7:18])
        translate([0.7, y, -1])
        rotate([0, 0, -65])
        cube([0.5, 2.1, 14]);
    }
}

module clipmask() {
    translate([0.3, -1, -1])
    cube([2.7, 20.1, 14]);
}