diff --git a/larpconnector/larpconnector.scad b/larpconnector/larpconnector.scad
new file mode 100644
index 0000000..d8a49c5
--- /dev/null
+++ b/larpconnector/larpconnector.scad
@@ -0,0 +1,80 @@
+$fn = 300;
+
+e = 0.02;
+
+difference() {
+    union() {
+        cylinder(h=15, d=11.6);
+
+        translate([0, 0, 15])
+        cylinder(h=15, d=8);
+        
+        for (r=[0, 180])
+        rotate([0, 0, r]) {
+            translate([0, 0, 25])
+            rotate_extrude(angle=45)
+            square([5, 5]);
+
+            translate([0, 0, 23])
+            intersection() {
+                rotate_extrude(angle=45)
+                square([5, 4]);
+
+                cylinder(h=2, d1=8, d2=10);
+            }
+}
+    }
+    
+    translate([0, 0, -e])
+    cylinder(h=(e + 30 + e), d=6.1);
+}
+
+
+translate([-3, 1, 16])
+rotate([0, 90, 0])
+linear_extrude(height=6)
+polygon([
+    [0, 0],
+    [2, 2],
+    [0, 2],
+]);
+
+translate([20, 0, 0]) {
+    difference() {
+        cylinder(h=20, d=11.6);
+        
+        translate([0, 0, -e])
+        cylinder(h=(15 + e), d=8.2);
+        
+        cylinder(h=(20 + e), d=3.5);
+        
+        translate([0, 0, 18.5])
+        cylinder(h=(1.5 + e), d=5);
+        
+        translate([0, 0, -e])
+        for (r=[0, 180])
+        rotate([0, 0, r]) {
+            rotate_extrude(angle=45)
+            square([5.05, 15 + e]);
+            
+            translate([0, 0, 10])
+            rotate_extrude(angle=135)
+            square([5.05, 5 + e]);
+            
+            translate([0, 0, 8])
+            intersection() {
+                rotate_extrude(angle=135)
+                square([5.05, 4]);
+
+                cylinder(h=(2+e), d1=8.2, d2=10.1);
+            }
+        }
+    }
+    
+    for (r=[0, 180])
+    rotate([0, 0, r]) {
+        rotate([0, 0, 85])
+        translate([5.05, 0, 9])
+        cylinder(h=7, r=0.2);
+    }
+}
\ No newline at end of file